Starch is one of the most common biodegradable polymers found in nature, and it is widely utilized in the food and beverage, bioplastic industry, paper industry, textile, and biofuel industries. Starch has received significant attention due to its environmental benignity, easy fabrication, relative abundance, non-toxicity, and biodegradability. However, native starch cannot be directly used due to its poor thermo-mechanical properties and higher water absorptivity. Therefore, native starch needs to be modified before its use. Major starch modification techniques include genetic, enzymatic, physical, and chemical. Among those, chemical modification techniques are widely employed in industries. This review presents comprehensive coverage of chemical starch modification techniques and genetic, enzymatic, and physical methods developed over the past few years. In addition, the current applications of chemically modified starch in the fields of packaging, adhesives, pharmaceuticals, agriculture, superabsorbent and wastewater treatment have also been discussed.

In this study, two types of modified cassava starch samples (MCS and MWS) prepared from commercially available native cassava starch (NCS) and native cassava starch extracted using the wet method (NWS) were investigated for the removal of Pb(II) ions from aqueous solutions. MCS and MWS samples were synthesized under acidic conditions using Pluronic 123 as the structure-directing agent and tetraethylorthosilicate (TEOS) as the chemical modifying agent. Modified starch samples were characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray Diffraction (XRD), and a nitrogen (N2) gas adsorption–desorption analyser. MCS and MWS showed enhanced thermal stabilities upon acid hydrolysis and chemical modification. The effects of contact time and initial Pb(II) concentration were studied through batch adsorption experiments. Adsorption kinetics followed the pseudo-second-order kinetic model. The equilibrium adsorption data were analysed and compared by the Langmuir and Freundlich adsorption models. The coefficient correlation (R2) was employed as a measure of the fit. The Langmuir model fitted well with equilibrium adsorption data, giving a maximum Pb(II) adsorption capacity of 370.37 and 294.12 mg/g for MWS and MCS, respectively. Modified samples exhibited a higher desorption efficiency of over 97%. This study demonstrated that modified starch could be utilized for Pb(II) removal from industrial wastewater.

The health and environmental concerns of the usage of non-biodegradable plastics have driven efforts to explore replacing them with renewable polymers. Although starch is a vital renewable polymer, poor water resistivity and thermo-mechanical properties have limited its applications. Recently, starch/synthetic biodegradable polymer blends have captured greater attention to replace inert plastic materials; the question of ‘immiscibility’ arises during the blend preparation due to the mixing of hydrophilic starch with hydrophobic polymers. The immiscibility issue between starch and synthetic polymers impacts the water absorption, thermo-mechanical properties, and chemical stability demanded by various engineering applications. Numerous studies have been carried out to eliminate the immiscibility issues of the different components in the polymer blends while enhancing the thermo-mechanical properties. Incorporating compatibilizers into the blend mixtures has significantly reduced the particle sizes of the dispersed phase while improving the interfacial adhesion between the starch and synthetic biodegradable polymer, leading to fine and homogeneous structures. Thus, Significant improvements in thermo-mechanical and barrier properties and water resistance can be observed in the compatibilized blends. This review provides an extensive discussion on the compatibilization processes of starch and petroleum-based polymer blends.

No abstract

Recently, pharmaceutical cocrystals have gained immense interest because of their potential to tune mechanical, pharmacokinetic, and physicochemical properties of active pharmaceutical ingredients (APIs) while keeping their therapeutic action intact. In this review, cocrystallization is raised as a viable strategy toward commercialized pharmaceutical manufacturing, where attention has been paid to solid-state cocrystal preparation methods and their opportunities and challenges in overall product and process development. A comparative study of cocrystallization in the form of mechanical energy is demonstrated with the aid of SELECT criteria to qualitatively evaluate the synthetic route selection of scalable mechanochemical cocrystallization methods. Remedies and alternatives for the challenges that arise in mechanochemical synthesis of cocrystals are presented in this review, highlighting the commercial perspectives of sustainable, eco-friendly, and less toxic mechanochemical methods.