We investigate a compact metamaterial for enhanced magnetic coupling in a resonator coupled wireless power transfer system operating at around 6.5 MHz. The metamaterial is constructed by realizing an array of three-turn spiral resonators on a thin slab. Although the metamaterial has its own loss, the experimental results show that the proposed metamaterial slab enhances the power transmission capability. The number of unit cells in the array is an important parameter, because exceeding a certain number of unit cells does not enhance the efficiency due to the loss of the slab. Furthermore, strong surface mode resonance is observed when two slabs are assembled with proper gap spacing between them. By using the optimization approach, we achieve a significant efficiency improvement at a mid-range distance. The measured efficiencies are 71.1% and 54.3% at a 0.6 and 1.0 m distance, respectively. At a 1.0 m distance, this efficiency performance corresponds to a 270% improvement compared to a case with no metamaterial slab. In addition, we experimentally confirm the threshold distances above which the metamaterial shows enhanced performance.

SUMMARYWe provide an introduction to modelling, identification, and control of a spherical particle trapped in an optical tweezer. The main purpose is to analyse the properties of an optical tweezer from a control systems point of view. By representing the non-inertial dynamics of a trapped particle using a stochastic differential equation, we discuss probability distributions and compute first mean exit times. Within the linear trapping region, experimentally measured mean passage times for a 9:6-mm diameter polystyrene bead show close agreement with theoretical calculations. We apply a recursive least squares method to a trapped 9:6-mm diameter polystyrene bead to study the possibility of obtaining faster calibrations of characteristic frequency. We also compare the performance of proportional control, LQG control, and nonlinear control to reduce fluctuations in particle position due to thermal noise. Assuming a cubic trapping force, we use computer simulations to demonstrate that the nonlinear controller can reduce position variance by a factor of 65 for a 1-mm diameter polystyrene bead under typical conditions.

No abstract

In this letter, we propose a magneto-inductive wave (MIW) metamaterial cavity for enhanced mid-range wireless power transfer (WPT) applications. Cavity operation is achieved by controlling the propagation of MIWs at lower megahertz frequencies. The cavity is realized by omitting a cell and thereby breaking the periodicity of the closely coupled metamaterial slabs. The cavity in the proposed metamaterial effectively confines the MIWs into a subwavelength region. Consequently, it localizes the magnetic field in the WPT region and provides enhanced power transmission. When the proposed MIW metamaterial cavity is used, the measured efficiency improves significantly from 8.7 to 54.9%.

Wireless power transfer (WPT) provides a convenient method of delivering energy to multiple devices. With the increasing use of WPT, safety concerns inevitably create the need for a reliable control mechanism. Previous approaches in advanced WPT or metamaterial-enhanced WPT, however, have the limitation that neither the intensity nor the shape of the field-localizing area can be dynamically controlled. To address this limitation, we introduce the novel concept of a hotspot or power-focused region using field-localizing WPT. Using the proposed method, we provide experimental evidence demonstrating that the location, shape, and intensity of the hotspot can be manipulated as desired. The hotspot effectively enhances power delivery to the intended device while reducing leakage to unwanted areas. To dynamically reconfigure the hotspots, we propose an active metasurface with multi-functionality due to its frequency switching and tuning capability. The dynamic reconfiguring capability provides a wide range of versatile practical applications, overcoming the limitations associated with passive metamaterials. Because the location, shape, and intensity of hotspots can readily be controlled, the proposed method is not limited to WPT applications. It can also be used for a broad range of applications that require precise control of power delivery.