The preparation and characterization of a controlled-release multicomponent (NPK) fertilizer with the coating layer consisting of a biodegradable copolymer of poly(butylene succinate) and a butylene ester of dilinoleic acid (PBS/DLA) is reported. The morphology and structure of the resulting polymer-coated materials and the thickness of the covering layers were examined using X-ray diffraction and scanning electron microscopy coupled with energy dispersive X-ray analysis. The mechanical properties of these materials were determined with a strength-testing machine. Nutrient release was measured in water using spectrophotometry, potentiometry, and conductivity methods. The results of the nutrient release experiments from these polymer-coated materials were compared with the requirements for controlled-release fertilizers. A conceptual model is presented describing the mechanism of nutrient release from the materials prepared in this study. This model is based on the concentrations of mineral components inside the water-penetrated fertilizer granules, the diffusion properties of the nutrients in water, and a diffusion coefficient through the polymer layer. The experimental kinetic data on nutrient release were interpreted using the sigmoidal model equation developed in this study.
Summary: Poly (glycerol sebacate) (PGS) and poly (butylene succinate-dilinoleate) (PBS-DLA) are biodegradable polymers with potential application in cardiac tissue engineering. In the present study novel blends comprising PGS prepolymer and PBS-DLA were prepared with varying compositions (70/30, 60/40, 50/50, 40/60, 30/70 and 0/100 in weight percentage). The physical, chemical, and mechanical properties of the PGS/PBS-DLA blends were measured and compared. By adding PBS-DLA to PGS the need for curing PGS prepolymer was eliminated, as the blended films are chemically stable. With increasing amount of PBS-DLA the hydrophobicity of the blend system increased reaching values close to that of neat PBS-DLA films. Furthermore, addition of PBS-DLA significantly affected the mechanical properties of the blends, i.e. the elastic modulus of the blends was enhanced with increasing PBS-DLA addition from 1.2 MPa to 54 MPa. At the same time, PBS-DLA addition led to decreased degradation rate of the films. Furthermore the PBS-DLA counteracted the acidity of the free carboxylic groups on the free end chains of the PGS prepolymer. In vitro cytocompatibility studies indicated high biocompatibility. Taken together the results confirm that the novel PGS/PBS-DLA matrices exhibit promising characteristics as a biomaterial for application in cardiac regeneration approaches.
The aim of this work was to investigate the thermal and mechanical properties of novel, electron beam-modified ester elastomers containing multifunctional alcohols. Polymers tested in this work consist of two blocks: sebacic acid–butylene glycol block and sebacic acid–sugar alcohol block. Different sugar alcohols were utilized in the polymer synthesis: glycerol, sorbitol, xylitol, erythritol, and mannitol. The polymers have undergone an irradiation procedure. The materials were irradiated with doses of 50 kGy, 100 kGy, and 150 kGy. The expected effect of using ionizing radiation was crosslinking process and improvement of the mechanical properties. Additionally, a beneficial side effect of the irradiation process is sterilization of the affected materials. It is also worth noting that the materials described in this paper do not require either sensitizers or cross-linking agent in order to perform radiation modification. Radiation-modified poly(polyol sebacate-co-butylene sebacate) elastomers have been characterized in respect to the mechanical properties (quasi-static tensile tests), cross-link density, thermal properties (Differential Scanning Calorimetry (DSC)), chemical properties: Fourier transform infrared spectroscopy (FTIR), and wettability (water contact angle). Poly(polyol sebacate-co-butylene sebacate) preopolymers were characterized with nuclear magnetic resonance spectroscopy (1H NMR and 13C NMR) and gel permeation chromatography (GPC). Thermal stability of cross-linked materials (directly after synthesis process) was tested with thermogravimetric analysis (TGA).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.