Multiport DC-DC converters are of potential interest in applications such as generation systems utilising multiple sustainable energy sources. A family of multiport bidirectional DC-DC converters derived from a general topology is presented. The topology shows a combination of DC-link and magnetic coupling. This structure makes use of both methods to interconnect multiple sources without the penalty of extra conversion or additional switches. The resulting converters have the advantage of being simple in topology and have a minimum number of power devices. The proposed general topology and basic cells show several possibilities to construct a multiport converter for particular applications and provide a solution to integrate diverse sources owing to their flexibility in structure. The system features a minimal number of conversion steps, low cost and compact packaging. In addition, the control and power management of the converter by a single digital processor is possible. The centralised control eliminates complicated communication structures that would be necessary in the conventional structure based on separate conversion stages. A control strategy based on classical control theory is proposed, showing a multiple PIDloop structure. The general topology and a set of three-port embodiments are detailed.

Multiport dc-dc converters are particularly interesting for sustainable energy generation systems where diverse sources and storage elements are to be integrated. This paper presents a zero-voltage switching (ZVS) three-port bidirectional dc-dc converter. A simple and effective duty ratio control method is proposed to extend the ZVS operating range when input voltages vary widely. Soft-switching conditions over the full operating range are achievable by adjusting the duty ratio of the voltage applied to the transformer winding in response to the dc voltage variations at the port. Keeping the volt-second product (half-cycle voltage-time integral) equal for all the windings leads to ZVS conditions over the entire operating range. A detailed analysis is provided for both the two-port and the three-port converters. Furthermore, for the three-port converter a dual-PI-loop based control strategy is proposed to achieve constant output voltage, power flow management, and soft-switching. The three-port converter is implemented and tested for a fuel cell and supercapacitor system.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract