A mathematical model was applied to continuous indoor and outdoor particulate matter (PM) measurements to estimate source strengths for a variety of prescribed human activities that resuspend house dust in the home. Activities included folding blankets, folding clothes, dry dusting, making a bed, dancing on a rug, dancing on a wood floor, vacuuming, and walking around and sitting on upholstered furniture. Although most of the resuspended particle mass from these activities was larger than 5 μm in diameter, the resuspension of PM2.5 and PM5 was substantial, with source strengths ranging from 0.03 to 0.5 mg min-1 for PM2.5 and from 0.1 to 1.4 mg min-1 for PM5. Source strengths for PM > 5 μm could not be quantified due to instrument limitations. The source strengths were found to be a function of the number of persons performing the activity, the vigor of the activity, the type of activity, and the type of flooring.

Experiments investigating particle resuspension from human activities were conducted in a full-scale experimental chamber. The experiments tested three types of flooring (vinyl tiles, new and old level-loop carpets) and two ventilation configurations (ceiling and side wall supply systems). The floorings were seeded with 0.1-10 µm test particles. The airborne particle concentration was measured by an array of optical particle counters (OPCs) in the chamber. Resuspension rates were estimated in size ranges of 0.8-1, 1.0-2.0, 2.0-5.0, and 5.0-10 µm ranging from 10 −5 -10 −2 hr −1 , with higher resuspension rates associated with larger particles. Resuspension via walking activity varied from experiment to experiment. "Heavy and fast" walking was associated with higher resuspension rates than less active walking, most likely due to a combination of increased pace, increased air swirl velocity, and electrostatic field effects established by the walking. The type of floorings also influenced the particle resuspension. Given the same size and mass distribution of test particles per unit floor area, resuspension rates for the seeded new level-loop carpet were significantly higher than those for the vinyl tile flooring for larger particles (1.0-10 µm) under the ceiling air supply system. INTRODUCTIONAs summarized by Lioy et al. (2002), settled dust is dominated by particles smaller than 500 µm; the most frequently identified components in house dust are skin, soil, starch, hair, cotton, and plant material (>85% of samples); and the second most frequently identified components are fungal material, synthetic fibers, polymers, paint, and metals. Specific toxicants identified in dust include semivolatile and non-volatile pesticides, polycyclic aromatic hydrocarbons (PAHs), heavy metals,

No abstract

Continuous laser particle counters collocated with time-integrated filter samplers were used to measure personal, indoor, and outdoor particulate matter (PM) concentrations for a variety of prescribed human activities during a 5-day experimental period in a home in Redwood City, CA, USA. The mean daytime personal exposures to PM 2.5 and PM 5 during prescribed activities were 6 and 17 times, respectively, as high as the pre-activity indoor background concentration. Activities that resulted in the highest exposures of PM 2.5 , PM 5 , and PM 10 were those that disturbed dust reservoirs on furniture and textiles, such as dry dusting, folding clothes and blankets, and making a bed. The vigor of activity and type of flooring were also important factors for dust resuspension. Personal exposures to PM 2.5 and PM 5 were 1.4 and 1.6 times, respectively, as high as the indoor concentration as measured by a stationary monitor. The ratio of personal exposure to the indoor concentration was a function of both particle size and the distance of the human activity from the stationary indoor monitor. The results demonstrate that a wide variety of indoor human resuspension activities increase human exposure to PM and contribute to the ''personal cloud'' effect.

The results from this study validate the recommendation that people sensitive to allergens could select hard floorings to reduce exposure and related adverse health outcomes. The results can also be applied to exposure models to determine the overall impact of exposure to resuspension as compared with other particle sources.

No abstract

Resuspension experiments were performed in a single-family residence. Resuspension by human activity was found to elevate the mass concentration of indoor particulate matter with an aerodynamic diameter less than 10 microm (PM10) an average of 2.5 times as high as the background level. As summarized from 14 experiments, the average estimated PM10 resuspension rate by a person walking on a carpeted floor was (1.4 +/- 0.6) x 10(-4) hr(-1). The estimated residence time for PM in the indoor air following resuspension was less than 2 hr for PM10 and less than 3 hr for 2-microm tracer particles. However, experimental results show that the 2-microm tracer particles stayed in the combined indoor air and surface compartments much longer (>>19 days). Using a two-compartment model to simulate a regular deposition and resuspension cycle by normal human activity (e.g., walking and sitting on furniture), we estimated residence time for 2-microm conservative particulate pollutants to be more than 7 decades without vacuum cleaning, and months if vacuum cleaning was done once per week. This finding supports the observed long residence time of persistent organic pollutants in indoor environments. This study introduces a method to evaluate the particle resuspension rate from semicontinuous concentration data of particulate matter (PM). It reveals that resuspension and subsequent exfiltration does not strongly affect the overall residence time of PM pollutants when compared with surface cleaning. However, resuspension substantially increases PM concentration, and thus increases short-term inhalation exposure to indoor PM pollutants.

The study presents particle number and mass concentrations, size distributions, emission rates, and emission fluxes from heating common cooking oils. The emission rates and emission fluxes can be used as inputs to models for indirect exposure analysis studies. The study may also be used to provide guidance on choosing oils that result in lower emission rates when heated.