Appropriate size and location of distributed generation (DG) play a significant role in minimizing power losses in distribution systems. This paper represents techniques to minimize power losses in a distribution feeder by optimizing DG model in terms of size, location and operating point of DG. Sensitivity analysis for power losses in terms of DG size and DG operating point has been performed. The proposed sensitivity indices can indicate the changes in power losses with respect to DG current injection. The proposed techniques have been developed with considering load characteristics and representing loads with constant impedance and constant current models, separately. The optimal size and location of DG in a distribution feeder can be obtained through the developed techniques, with minimum effort. The proposed techniques have been tested on a practical long radial system and results are reported. Test results have proven that up to eighty-six percent of real power loss can be reduced with a DG of optimal size, located at optimal place in the feeder.

No abstract

To meet the fast growth of electricity demand, the traditional network solution tends to expand existing substations, build more new substations, and build transmission lines. Distributed Generation (DG) is posed as an alternative method for the network providers not only to accommodate the load increase and relieve network overload, but also to offer other additional technical and economic benefits. This paper addresses the issue of DG planning and has proposed a technique for optimizing the DG size and location to minimize the overall investment and operational cost of the system. The proposed optimization methodology assesses the compatibility of different generation schemes in terms of their cost factors that can be significantly contributed by a DG. The direct and indirect costs of power supply quality, reliability, energy loss, total power operation, and DG investment are used as key cost components of the DG siting and sizing strategy. The Particle Swarm Optimization (PSO) method is applied to obtain the optimal DG planning solutions. Finally, the proposed approach is tested on a distribution feeder of an Australian power network. Simulation results are presented to illustrate the feasibility and effectiveness of the proposed method. Abstract -To meet the fast growth of electricity demand, the traditional network solution tends to expand existing substations, build more new substations, and build transmission lines. Distributed Generation (DG) is posed as an alternative method for the network providers not only to accommodate the load increase and relieve network overload, but also to offer other additional technical and economic benefits. This paper addresses the issue of DG planning and has proposed a technique for optimizing the DG size and location to minimize the overall investment and operational cost of the system. The proposed optimization methodology assesses the compatibility of different generation schemes in terms of their cost factors that can be significantly contributed by a DG. The direct and indirect costs of power supply quality, reliability, energy loss, total power operation, and DG investment are used as key cost components of the DG siting and sizing strategy. The Particle Swarm Optimization (PSO) method is applied to obtain the optimal DG planning solutions. Finally, the proposed approach is tested on a distribution feeder of an Australian power network. Simulation results are presented to illustrate the feasibility and effectiveness of the proposed method.2

Integration of small-scale electricity generators, known as distributed generation (DG), into the distribution networks has become increasingly popular at the present. This tendency together with the falling price of the synchronous-type generator has potential to give DG a better chance at participating in the voltage regulation process together with other devices already available in the system. The voltage control issue turns out to be a very challenging problem for the distribution engineers since existing control coordination schemes would need to be reconsidered to take into account the DG operation. In this paper, we propose a control coordination technique, which is able to utilize the ability of DG as a voltage regulator and, at the same time, minimize interaction with other active devices, such as an on-load tap changing transformer and a voltage regulator. The technique has been developed based on the concept of control zone, line drop compensation, dead band, as well as the choice of controllers' parameters. Simulations carried out on an Australian system show that the technique is suitable and flexible for any system with multiple regulating devices including DG.Index Terms-Control zone, distributed generation (DG), distribution system, hysteresis band, line drop compensator, on-load tap changing transformer (OLTC), voltage control.

No abstract