The characteristics of a novel magneto-optic surface-plasmon-resonance (MOSPR) sensor and its use for the detection of biomolecules are presented. This physical transduction principle is based on the combination of the magneto-optic activity of magnetic materials and a surface-plasmon resonance of metallic layers. Such a combination can produce a sharp enhancement of the magneto-optic effects that strongly depends on the optical properties of the surrounding medium, allowing its use for biosensing applications. Experimental characterizations of the MOSPR sensor have shown an increase in the limit of detection by a factor of 3 in changes of refractive index and in the adsorption of biomolecules compared with standard sensors. Optimization of the metallic layers and the experimental setup could result in an improvement of the limit of detection by as much as 1 order of magnitude.

Integrated optical sensors have become important in recent years since they are the only technology which allows the direct detection of biomolecular interactions. Moreover, silicon microelectronics technology allows mass production as well as the fabrication of nano-/macrosystems on the same platform by hybrid integration of sources, sensors, photodetectors and complementary metal-oxide semiconductor electronics.For the fabrication of an optical sensor nanodevice with an integrated Mach–Zehnder interferometric (MZI) configuration, the optical waveguides must have two main features: monomode behaviour and a high surface sensitivity. In this paper we present the development of a MZI sensor based on total internal reflection waveguides with nanometre dimensions. The aim is to use these sensors in environmental control to detect water pollutants by immunoassay techniques.

No abstract

Biomolecular interactions over the surface of a microcantilever can produce its bending motion via changes of the surface stress, which is referred to nanomechanical response. Here, we have studied the interaction forces responsible for the bending motion during the formation of a self-assembled monolayer of thiolated 27-mer single-stranded DNA on the gold-coated side of a microcantilever and during the subsequent hybridization with the complementary nucleic acid. The immobilization of the single-stranded DNA probe gives a mean surface stress of 25 mN/m and a mean bending of 23 nm for microcantilevers with a length and thickness of about 200 microm and 0.8 microm, respectively. The hybridization with the complementary sequence could not be inferred from the nanomechanical response. The nanomechanical response was compared with data from well-established techniques such as surface plasmon resonance and radiolabeling, to determine the surface coverage and study the intermolecular forces between neighboring DNA molecules anchored to the microcantilever surface. From both techniques, an immobilization surface density of 3 x 10(12) molecules/cm(2) and a hybridization efficiency of 40% were determined. More importantly, label-free hybridization was clearly detected in the same conditions with a conventional sensor based on surface plasmon resonance. The results imply that the nanomechanical signal during the immobilization process arises mainly from the covalent attachment to the gold surface, and the interchain interactions between neighboring DNA molecules are weak, producing an undetectable surface stress. We conclude that detection of nucleic acid hybridization with nanomechanical sensors requires reference cantilevers to remove nonspecific signals, more sensitive microcantilever geometries, and immobilization chemistries specially addressed to enhance the surface stress variations.

In this paper, we analyze the magnetoplasmonic ͑MP͒ features and sensing capabilities of Au/Fe/Au trilayer structures, as transducers of the magneto-optic surface plasmon resonance ͑MOSPR͒ biosensor. This biosensor, which can surpass the sensitivity of the standard SPR sensor, is based on a MP modulation technique generated by the simultaneous stimulation of the surface plasmon polaritons ͑SPP͒ and the transversal magneto-optical Kerr effect ͑TMOKE͒. We study the magneto-optical activity of the trilayers as a function of the thickness and position of the Fe layer. We first demonstrate that this kind of structure allows modulating the SPP through an external magnetic field and moreover, induce a strong enhancement of the TMOKE effect. The modulation of the SPP is linearly proportional to the thickness of Fe layer and inversely proportional to the distance between the Fe layer and the external dielectric medium. Finally, we experimentally confirm a twofold increase in the MOSPR sensitivity with respect to the intensity-interrogated SPR biosensor in bulk refractive-index changes, keeping a similar chemical resistance and stability, unprecedented in other MP transducers, and biofunctionalization protocols.