The need of clean energy is constantly increasing, and Building Integrated PhotoVoltaic (BIPV) technologies represent valuable assets to expand even further the photovoltaic market. Thanks to BIPVs. a new concept of local electric microgrid will probably emerge as this kind of technology can turn buildings from energy wells to energy sources. Luminescent Solar Concentrator (LSC) panels are perfect to achieve this goal, indeed, contrary to standard flat PhotoVoltaic (PV) modules, they can be exploited in transparent or semi-transparent building façades. Thus, the purpose of this work was the optimization of the performance of LSC panels for BIPV applications. Being an application-oriented study, we paid particular attention to the scalability of the assembling process and the use of LSC slabs functionalized only with widely available organic commercial dyes and high-performance commercial silicon solar cells. The electrical and optical performance of the LSC panels were firstly simulated and then, once the most promising configurations were identified, the respective prototypes were assembled to compare the simulation results with the experimental measurements. These analyses were performed both under uniform illumination and in some relevant shading configurations typical for BIPV devices in operating conditions. The obtained results show that LSC panels that employ PV cells coupled with reflective films can yield a higher efficiency than a traditional system with cells placed along four sides.

No abstract

The increasing trend towards decarbonization requires the reduction of the environmental impact of the building sector that currently accounts for approximately 40% of the total CO2 emissions of European countries. Even though Luminescent Solar Concentrator (LSC) panels could be a very promising technology to be installed in urban environments, there is still little implementation of LSC panels in building façades. Here, the realization of a Ventilated Façade (VF) integrating an LSC device as an external pane is presented and a preliminary numerical and experimental investigation is used to evaluate the interaction between the different structure components. Thanks to the realization of a dedicated mock-up finite element method, models are calibrated and validated against experimental measurements, showing a good correspondence between simulated and measured data. Moreover, the electrical characterization of the LSC panel confirms that large area devices can be used as an external skin of VF, reporting a photovoltaic efficiency of 0.5%. The system’s thermal and optical properties (estimated thanks to the software COMSOL Multiphysics) encourage the continuation of the research by considering different technologies for the VF internal skin, by scaling up the case study, and by running the simulation of an entire building considering winter and summer energy demands.

No abstract

No abstract

No abstract