We discuss the fabrication of gas-analytical multisensor arrays based on ZnO nanorods grown via a hydrothermal route directly on a multielectrode chip. The protocol to deposit the nanorods over the chip includes the primary formation of ZnO nano-clusters over the surface and secondly the oxide hydrothermal growth in a solution that facilitates the appearance of ZnO nanorods in the high aspect ratio which comprise a network. We have tested the proof-of-concept prototype of the ZnO nanorod network-based chip heated up to 400 °C versus three alcohol vapors, ethanol, isopropanol and butanol, at approx. 0.2–5 ppm concentrations when mixed with dry air. The results indicate that the developed chip is highly sensitive to these analytes with a detection limit down to the sub-ppm range. Due to the pristine differences in ZnO nanorod network density the chip yields a vector signal which enables the discrimination of various alcohols at a reasonable degree via processing by linear discriminant analysis even at a sub-ppm concentration range suitable for practical applications.

Hydrophilic layers of porous silicon are prepared by single-or two-step anodization and characterized by evaluating their surface hydrophilicity and contents of functional groups using IR spectroscopy and adsorption of acid-base indicators with different p a values. The surface functional composition of the synthesized samples is shown to be adjustable depending on the anodization current density. The surface of samples obtained at anodization current density 30 mA/cm 2 is predominantly occupied with p a 2.5 corresponding to ≡Si-OH groups. The increase of current density to 80 mA/cm 2 results in the increase of surface functional nonuniformity with the formation of versatile centers, primarily Lewis acidic sites corresponding to Si atoms, as indicated by selective indicator adsorption in agreement with the disappearance of Si-H bonds in IR spectra and overall surface disordering according to SEM and AFM data.

Approaches are being developed to create composite materials with a fractal-percolation structure based on intercalated porous matrices to increase the sensitivity of adsorption gas sensors. Porous silicon, nickel-containing porous silicon, and zinc oxide have been synthesized as materials for such structures. Using the impedance spectroscopy method, it has been shown that the obtained materials demonstrate high sensitivity to organic solvent vapors and can be used in gas sensors. A model is proposed that explains the high sensitivity and inductive nature of the impedance at low frequencies, considering the structural features and fractal-percolation properties of the obtained oxide materials.

No abstract

No abstract

No abstract

No abstract

The experimental results of electrical and thermal characteristics of circuit boards based on aluminum with a nanostructured layer of anodic aluminum oxide and copper conductors for assembling highpower field-effect transistors have been considered. It has been shown that the presence of a thin dielectric layer and thick aluminum base with high thermal conductivity provides a uniform distribution of heat generated by the active element over the entire volume of the board without formation of local regions with increased temperature. The experimental results have shown that the temperature gradient between the heat source and anodic aluminum oxide surface is about 17-18°C at a surface heat power of 4.4 W/cm 2 .