Wind Tunnel Experimental Study on the Efficiency of Vertical-Axis Wind Turbines via Analysis of Blade Pitch Angle Influence

Abstract

This paper presents results of experimental investigations and numerical simulations of a vertical-axis H-type wind turbine, considering the influence of propeller blade pitch angle on turbine characteristics. An innovative airfoil profile based on a modified symmetric NACA0015 airfoil profile was used as the designed blade profile, which was tested in a wind tunnel over a range of Reynolds numbers from 50,000 to 300,000. The phenomenon of angle-of-attack variation and the resulting forces acting on the blades, particularly in the horizontal configuration and vertical axis of rotation, were discussed. Series of experiments were conducted on a 1:1 scale four-bladed turbine model in the wind tunnel to determine the characteristics, specifically the power coefficient distribution over the tip speed ratio for various Reynolds numbers and blade pitch angles. Subsequently, the turbine was modeled using Qblade software, and a series of calculations were performed under the same conditions. The numerical results were validated with the experimental data.

Study of the Moment of Drag and Lift on Different Air-foil Shapes and Thickness During Wind Tunnel Application: A Review

“…Achieving effective and high-performing airfoil forms is essential in the renewable energy, automobile, and aerospace sectors. Despite the insights provided by computational simulations, empirical validation through wind tunnel experiments is necessary for trustworthy and accurate results [3]. But developing airfoils and carrying out experimental evaluations are both difficult tasks.…”