Wall Climbing Robot Using Electrostatic Adhesion Force Generated by Flexible Interdigital Electrodes

Abstract

Electrostatic adhesion technology has broad application prospects on wall climbing robots because of its unique characteristics compared with other types of adhesion technologies. A double tracked wall climbing robot based on electrostatic adhesion technology is presented including electrode panel design, mechanical structure design, power supply system design and control system design. A theoretical adhesion model was established and the electrostatic potential and field were expressed by series expansions in terms of solutions of the Laplace function. Based on this model, the electrostatic adhesion force was calculated using the Maxwell stress tensor formulation. Several important factors which may influence the electrostatic adhesion force were analysed and discussed by both FEM simulation and theoretical calculation. In addition, experiments on the adhesion performance of the electrode panel and the climbing performance of the robot on various wall materials were carried out. Both the simulation and experiment results verify the feasibility of electrostatic adhesion technology being applied on wall climbing robots. The theoretical model and calculation method for the electrostatic adhesion force proposed in this paper are also justified.

Electroadhesion for soft adhesive pads and robotics: theory and numerical results

“…Intuitively, one expect this approach to be accurate when the interaction force between the surfaces is long-range, and a similar approach has been used for the attraction resulting from capillary bridges [23,24] and also in an earlier study of electroadhesion [13][14][15]. Using (16) and (17) we have:…”

Inverted and vertical climbing of a quadrupedal microrobot using electroadhesion

“…In parallel with bioinspired adhesion strategies, engineered methods, such as vacuum tracks (15,16), permanent magnetic and electromagnetic mechanisms (17,18), and electroadhesive pads (19)(20)(21), have proven to be successful surface attachment options. It is often the case that the adhesion type determines the size and design complexity of the robot; for example, vacuum track-based suction mechanisms (15,16) or electromagnetic mechanisms (17,18) require the robots to use heavy on-board components that increase their overall mass and reduce maneuverability.…”

Grasping Claws of Bionic Climbing Robot for Rough Wall Surface: Modeling and Analysis

“…Wall climbing robots, which are a special operation mechanism in extreme environment generally adhere to walls by virtue of negative suckers, permanent magnets, or bio-inspired adhesion [1][2][3][4][5][6]. However, magnetic adhesion fails for wall surfaces under long-term vibrations, such as diagonal cable bridge towers and viaduct bridge piers.…”