Very-high-frequency probes for atomic force microscopy with silicon optomechanics

Abstract

Atomic force microscopy (AFM) has been consistently supporting nanosciences and nanotechnologies for over 30 years and is used in many fields from condensed matter physics to biology. It enables the measurement of very weak forces at the nanoscale, thus elucidating the interactions at play in fundamental processes. Here, we leverage the combined benefits of micro/nanoelectromechanical systems and cavity optomechanics to fabricate a sensor for dynamic mode AFM at a frequency above 100 MHz. This frequency is two decades above the fastest commercial AFM probes, suggesting an opportunity for measuring forces at timescales unexplored thus far. The fabrication is achieved using very-large-scale integration technologies derived from photonic silicon circuits. The probe’s optomechanical ring cavity is coupled to a 1.55 μm laser light and features a 130 MHz mechanical resonance mode with a quality factor of 900 in air. A limit of detection in the displacement of 3 × 10−16 m/√Hz is obtained, enabling the detection of the Brownian motion of the probe and paving the way for force sensing experiments in the dynamic mode with a working vibration amplitude in the picometer range. When inserted in a custom AFM instrument embodiment, this optomechanical sensor demonstrates the capacity to perform force-distance measurements and to maintain a constant interaction strength between the tip and sample, an essential requirement for AFM applications. Experiments indeed show a stable closed-loop operation with a setpoint of 4 nN/nm for an unprecedented subpicometer vibration amplitude, where the tip–sample interaction is mediated by a stretched water meniscus.

Free-access optomechanical liquid probes using a twin-microbottle resonator

“…Recently, cavity optomechanical sensors have been studied for use as ultrasensitive chemical and biological sensors [9]- [14] and high-frequency rheometers [15] in liquid environments. To perform highly sensitive detection of mechanical motion in a liquid environment, it is of utmost Motoki Asano, Hiroshi Yamaguchi, and Hajime Okamoto are with the NTT Basic Research Laboratories, 3-1 Morinosato Wakamiya, Atsugi-shi, Kanagawa 243-0198, Japan.…”

Design, fabrication, and characterization of kinetic-inductive force sensors for scanning probe applications

“…The integrated resonator used for motion detection also provides a potentially quantum-limited approach to motion detection. It is difficult to make a complete and detailed comparison of AFM force sensors using a microwave resonator with those using an optical cavity to detect motion [ 10 , 43 ] because of numerous differences in the entire measurement apparatus. However, in comparison to optical resonators, the ability of microwave resonators to easily operate in the sideband-resolved regime allows for additional and potentially more efficient schemes of sensing force with minimal back-action from motion detection.…”

Investigations on tip-based large area nanofabrication and nanometrology using a planar nanopositioning machine (NFM-100)

“…In addition, high-frequency cantilevers can contribute to shorter measuring times due to their smaller dimensions [57] and the use of multi-cantilever arrays [58], which can contribute to shorter measuring/fabrication times.…”