Validation of the Molar Flow Rates of Oil and Gas in Three-Phase Separators Using Aspen Hysys

Abstract

A three-phase separator is the first vessel encountered by well fluids. The application of separators has been of great value to the oil and gas industry. In order to generate the gas phase envelope that is applicable to the study of reservoir fluid and the selection of optimum operating conditions of separators, this research utilizes a specified reservoir fluid stream to simulate a three-phase separator executed in Aspen HYSYS. Subsequently, a comparative study of the effects of specified inlet operating conditions on the output of gas and oil streams was carried out. The results show that changing the inlet pressure of the separator from 1000 to 8000 kPa reduces the gas outlet flow from 1213 to 908.6 kg mol/h, while it increases the liquid flow rate from 374 to 838.0 kg mole/h. By changing the temperature of the separator feed stream from 13 to 83 °C, the gas outlet stream was raised from 707.4 to 1111 kg mol/h, while the liquid flow rate dropped from 1037.0 to 646.1 kg mol/h. It was observed that the concentration of the outlet methane product is not affected by changing the flow rate of the feed stream at a specific pressure and temperature. Therefore, the thermodynamic property method is appropriate to simulate the separation of reservoir fluids which was achieved by selecting the Peng–Robinson (PR) model. The operating conditions of the separator were at 8000 kPa and 43 °C, which lies right on the dew point line. This is comparable to similar work on CHEMCAD which was in turn validated by plant data. Thus, the gas flow rate and the oil flow rate were dependent on pressure and temperature conditions of the plant.

Flowline Modification of Vapour Closed Drain to Acid Flare at Matindok CPP in Reducing CO2 Emission

“…Due to HYSYS's significantly faster solution replication, large and complicated models can be deployed in demanding scenarios like online real-time optimization. Given that HYSYS generates heat and material balance (HMB), most industries choose to utilize it as their oil process software (Olugbenga, 2021). Aspen HYSYS have been used to design a new gas plant.…”

Selecting Optimum Dimensions for a Three-Phase Horizontal Smart Separator for Khor Mor Gas-Condensate Processing Plant

“…Olugbenga et al [22] stated that fugacity is a valuable tool for analysing multicomponent equilibrium involving liquid and vapor phases. It enables the prediction of the reaction state and final phase of such mixtures at varying pressures and temperatures without the need for laboratory experiments.…”

Analysis of the Process Parameter in Fluid Catalytic Cracking Unit for a Refining and Petrochemical Company in Nigeria

“…Aspen HYSYS is a combination of tools that are used for estimating the physical properties and liquid-vapour phase equilibrium of various inbuilt components. The liquid vapour phase is studied via equation of state [20]. These components are the catalyst and feedstock that are used within the plant, within the reaction and separation sections.…”