Validation of the COTENP Code: A Steady-State Thermal-Hydraulic Analysis Code for Nuclear Reactors with Plate Type Fuel Assemblies

Abstract

This article presents the validation of the Code for Thermal-hydraulic Evaluation of Nuclear Reactors with Plate Type Fuels (COTENP), a subchannel code which performs steady-state thermal-hydraulic analysis of nuclear reactors with plate type fuel assemblies operating with the coolant at low pressure levels. The code is suitable for design analysis of research, test, and multipurpose reactors. To solve the conservation equations for mass, momentum, and energy, we adopt the subchannel and control volume methods based on fuel assembly geometric data and thermal-hydraulic conditions. We consider the chain or cascade method in two steps to facilitate the analysis of whole core. In the first step, we divide the core into channels with dimensions equivalent to that of the fuel assembly and identify the assembly with largest enthalpy rise as the hot assembly. In the second step, we divide the hot fuel assembly into subchannels with size equivalent to one actual coolant channel and similarly identify the hot subchannel. The code utilizes the homogenous equilibrium model for two-phase flow treatment and the balanced drop pressure approach for the flow rate determination. The code results include detailed information such as core pressure drop, mass flow rate distribution, coolant, cladding and centerline fuel temperatures, coolant quality, local heat flux, and results regarding onset of nucleate boiling and departure of nucleate boiling. To validate the COTENP code, we considered experimental data from the Brazilian IEA-R1 research reactor and calculated data from the Chinese CARR multipurpose reactor. The mean relative discrepancies for the coolant distribution were below 5%, for the coolant velocity were 1.5%, and for the pressure drop were below 10.7%. The latter discrepancy can be partially justified due to lack of information to adequately model the IEA-R1 experiment and CARR reactor. The results show that the COTENP code is sufficiently accurate to perform steady-state thermal-hydraulic design analyses for reactors with plate type fuel assemblies.

A Thermal Hydraulic Model for Power Upgrading of WWR-S Research Reactor

“…Where: φ is the average heat flux, φmax is the maximum admissible heat flux, and zc is the active core height in which coolant temperature can be determined by (14) Where: ze=zc+e, e is the extrapolated length, Ath is the cross sectional area of the fuel, qmax is the maximum volumetric heat generation (at the core center), w is the coolant mass flow rate, Tco,in is the coolant inlet temperature, and z is the direction of fuel element height. JAUES,17,62,2022…”

Steady-State Thermal-Hydraulic Analysis of the LEU-Fueled Dalat Nuclear Research Reactor

“…e obtained calculation results were compared with experimental data collected using a VVR-M2 instrumented fuel bundle (IFB) mounted with nine incorporated thermocouples on the fuel cladding [1]. is experimental method was also applied in validation of the code for steady-state thermal-hydraulic analysis of nuclear reactors with plate type fuels using experimental data from the IEA-R1 reactor in Brazil [17].…”