Unique Infill Configuration To Unlock Additional Barrels in the Boscán Heavy-Oil Water-Injection Project

Abstract

Summary Boscán is a giant multibillion-barrel heavy-oil (10.5 °API and asphaltic) field in Venezuela. Although a large part of the field is on primary production with a low recovery factor (<6%), water injection has been successfully implemented in portions of the field for more than 15 years, with improved recovery. High-mobility-ratio-waterflood (HMRWF) behavior and associated key production mechanisms obtained from detailed field-data analysis and dynamic modeling are presented. A novel and unique infill configuration is also proposed to further improve recovery in this environment with a high (or adverse) mobility ratio. Water injection in such heavy oil was previously considered not effective by the industry because of adverse mobility ratio. However, water injection for pressure maintenance (WIPM) was successfully implemented using a new pattern configuration, a pseudo-1-3-1 inverted- spot pattern (an additional row of producers between conventional-pattern rows). Field-data and reservoir-simulation models show increased reservoir pressure up to the second row of producers from the injector. The pressure support is used to significantly improve recovery using the unique configuration at low water cut. WIPM has already resulted in significant reserves addition. Current production from water-injection areas is approximately 40,000 MBOPD (or approximately 47% of field production). However, it is estimated that because of high oil viscosity, a significant amount of oil remains bypassed in the WIPM area. An infill opportunity was identified from an integrated reservoir-management study that included detailed WIPM data analysis and dynamic (mechanistic and full-field) modeling. A unique infill configuration is proposed that conceptually uses the current injectors with an additional row of producers between the existing first and second row of the producers. This configuration has the potential to economically unlock millions of barrels of bypassed oil and significantly increase recovery in this prolific heavy-oil field. This study provides insights into HMRWF behavior, evaluating the relative effect of displacement vs. pressure. The unique and novel infill configuration can be used to improve recovery, a step vital to monetize this large resource in the low-price environment.

Workflow of the In Situ Combustion EOR Method in Venezuela: Challenges and Opportunities

“…Another important aspect to consider for the implementation of the ISC method in the FPO is the variation of water saturation, which can vary between 7 and 100% due to the presence of aquifers and/or flushed zones. It is important to mention that thermal methods in areas with high water risks (adverse mobility ratio), both in the Eastern Venezuela and Lake Maracaibo basins, have not been technically and economically feasible. ,− In these reservoirs, methods such as chemical injection or water injection have been envisaged. ,, …”

“…It is important to mention that thermal methods in areas with high water risks (adverse mobility ratio), both in the Eastern Venezuela and Lake Maracaibo basins, have not been technically and economically feasible. 7 , 89 − 92 In these reservoirs, methods such as chemical injection or water injection have been envisaged. 1 , 7 , 81…”

Application and Research Prospect of Functional Polymer Gels in Oil and Gas Drilling and Development Engineering

“…Many large-scale dominant channels are formed in the deep part of the reservoir, resulting in serious inefficient and ineffective circulation, decreasing oil production and rising water content too fast in oil wells. Depth dissection technology is one of the most effective ways to improve the wave and volume of injected fluid and control inefficient and ineffective circulation [86,87]. The deep dissection will encounter a vicious environment of high temperature and high mineralization, and to solve the above problems, it is necessary to study the temperature and salt-resistant dissection and water plugging agent for low permeability and high-water-bearing wells to improve the recovery rate.…”