Abstract:This article offers a power quality (PQ) strategy to reduce light intensity flickers, voltage enhancements, and harmonics mitigation of the grid current in extensive networks of LED lighting at Cairo airport, Egypt. A transformerless unified power quality conditioner (TL-UPQC) with its controls is presented to address the majority of PQ issues in a network. The TL-UPQC comprises a dynamic voltage restorer (DVR) as a series compensator, which quickly maintains the load voltage when there is a voltage decrease, … Show more
Integration of renewable energy sources (RES) to the grid in today’s electrical system is being encouraged to meet the increase in demand of electrical power and also overcome the environmental related problems by reducing the usage of fossil fuels. Power Quality (PQ) is a critical problem that could have an effect on utilities and consumers. PQ issues in the modern electric power system were turned on by a linkage of RES, smart grid technologies and widespread usage of power electronics equipment. Unified Power Quality Conditioner (UPQC) is widely employed for solving issues with the distribution grid caused by anomalous voltage, current, or frequency. To enhance UPQC performance, Fractional Order Proportional Integral Derivative (FOPID) is developed; nevertheless, a number of tuning parameters restricts its performance. The best solution for the FOPID controller problem is found by using a Coati Optimization Algorithm (COA) and Osprey Optimization Algorithm (OOA) are combined to make a hybrid optimization CO-OA algorithm approach to mitigate these problems. This paper proposes an improved FOPID controller to reduce PQ problems while taking load power into account. In the suggested model, a RES is connected to the grid system to supply the necessary load demand during the PQ problems period. Through the use of an enhanced FOPID controller, both current and voltage PQ concerns are separately modified. The pulse signal of UPQC was done using the optimal controller, which analyzes the error value of reference value and actual value to generate pulses. The integrated design mitigates PQ issues in a system at non-linear load and linear load conditions. The proposed model provides THD of 12.15% and 0.82% at the sag period, 10.18% and 0.48% at the swell period, and 10.07% and 1.01% at the interruption period of non-linear load condition. A comparison between the FOPID controller and the traditional PI controller was additionally taken. The results showed that the recommended improved FOPID controller for UPQC has been successful in reducing the PQ challenges in the grid-connected RESs system.
Integration of renewable energy sources (RES) to the grid in today’s electrical system is being encouraged to meet the increase in demand of electrical power and also overcome the environmental related problems by reducing the usage of fossil fuels. Power Quality (PQ) is a critical problem that could have an effect on utilities and consumers. PQ issues in the modern electric power system were turned on by a linkage of RES, smart grid technologies and widespread usage of power electronics equipment. Unified Power Quality Conditioner (UPQC) is widely employed for solving issues with the distribution grid caused by anomalous voltage, current, or frequency. To enhance UPQC performance, Fractional Order Proportional Integral Derivative (FOPID) is developed; nevertheless, a number of tuning parameters restricts its performance. The best solution for the FOPID controller problem is found by using a Coati Optimization Algorithm (COA) and Osprey Optimization Algorithm (OOA) are combined to make a hybrid optimization CO-OA algorithm approach to mitigate these problems. This paper proposes an improved FOPID controller to reduce PQ problems while taking load power into account. In the suggested model, a RES is connected to the grid system to supply the necessary load demand during the PQ problems period. Through the use of an enhanced FOPID controller, both current and voltage PQ concerns are separately modified. The pulse signal of UPQC was done using the optimal controller, which analyzes the error value of reference value and actual value to generate pulses. The integrated design mitigates PQ issues in a system at non-linear load and linear load conditions. The proposed model provides THD of 12.15% and 0.82% at the sag period, 10.18% and 0.48% at the swell period, and 10.07% and 1.01% at the interruption period of non-linear load condition. A comparison between the FOPID controller and the traditional PI controller was additionally taken. The results showed that the recommended improved FOPID controller for UPQC has been successful in reducing the PQ challenges in the grid-connected RESs system.
“…In ref. [26], a PQ strategy was proposed to mitigate light flickers, voltage stability, and harmonics in the utility of large-scale LED lighting networks. To address these PQ concerns comprehensively, a transformerless UPQC (TL-UPQC) and its control system are introduced.…”
Power quality (PQ) is a major issue in today’s electrical system that affects both utilities and customers. The proliferation of power electronics devices, smart grid technology, and renewable energy sources (RES) have all contributed to the emergence of PQ concerns in today’s power system. The Unified Power Quality Conditioner (UPQC) is a versatile tool that can be used to fix distribution grid issues caused by irregular voltage, current, or frequency. Several tuning parameters, however, restrict the effectiveness of the Fractional-Order Proportional Integral Derivative (FOPID) control technique, which is proposed to improve UPQC performance. To move beyond these restrictions and find the optimal solution for the FOPID controller problem, a hybrid optimization strategy called the Hybrid Jellyfish Search Optimizer and Particle Swarm Optimizer (HJSPSO) is employed. To meet the load requirement during PQ issue periods, the suggested model incorporates a renewable energy source into the grid system. Whether the load is linear or non-linear, the design maintains PQ problems to a minimum. Furthermore, the FOPID control technique is compared with other controllers. Results show that grid-connected RES systems using the proposed FOPID control approach for UPQC have fewer PQ problems. The presented UPQC with HJSPSO strategy significantly outperformed, with the shortest computing time of 127.474 s and an objective function value of 1.423.
“…IGBT-based VSC and DSP are used in the lab to conduct experiments on grid-integrated PV systems. Sally E. Abdel Mohsen et al [26] discussed that UPQC injects the required voltage magnitude so that UPQC's performance is successfully achieved to provide a flicker-free LED lighting network. The technology can address the severe dynamic and static PQ challenges for networks of LED lighting.Thamizh Thentrala er al., [27] presented modified unified power quality conditioner based on a modular multilevel converter is implemented to mitigate the voltage and current related power quality issues.…”
The integration of hybrid renewable energy systems (HRES) in grid-connected load systems has become popular due to its ability to enhance reliability and reduce losses. However, this integration can lead to power quality (PQ) issues caused by non-linear, critical, and unbalanced load conditions. To address these PQ issues and compensate for load demand in HRES systems, a new method called Self-Improved Battle Royal Optimizer (SI-BRO) has been proposed. This method involves the use of a Unified Power Quality Conditioner (UPQC) device, which is designed to improve the system’s PQ performance. To enhance the performance of the UPQC device, an optimized fuzzy logic controller is introduced in the series and shunt active power filter, and its parameters are optimized using the SI-BRO model. The proposed method is implemented in MATLAB/Simulink, and its effectiveness is evaluated through different scenarios in IEEE 14 Bus system. These scenarios include the introduction of a nonlinear load to create PQ issues, and the comparison of Sag, Swell, and fluctuation of proposed technique i.e. SI-BRO optimizer with BRO,HHO ,EHO optimizer and calculation of THD in proposed technique.In all cases of Sag,Swell, Fluctuation , the proposed techniques gives better results in comparison to BRO,HHO & EHO.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.