Ultrasound assessment of the conversion of sound energy into heat in tissue phantoms enriched with magnetic micro‐ and nanoparticles

Abstract

Purpose Nowadays, the improvement of ultrasonic hyperthermia therapy is often achieved by adding hard particles to the sonicated medium in order to increase the heating efficiency. The explanation of the phenomenon of ultrasonic heating still requires testing on tissue mimicking materials (TMMs), enriched with particles of different sizes and physical properties. Our goal was to determine, by comparing their quantitative acoustic properties, which TMMs, with magnetic micro‐ or nanoparticles, convert more ultrasonic energy into heat or which of the particles embedded in the agar gel act as more effective thermal sonosensitizers. Methods We manufactured a pure agar gel and an agar gel with the addition of magnetic micro‐ or nanoparticles in two proportions of 8 and 16 mg/ml. Ultrasound quantitative techniques, the broadband reflection substitution technique and backscattered spectrum analysis were used to characterize the samples by speed of sound (SOS), frequency‐dependent attenuation, and backscattering coefficients. The integrated backscattering coefficients were also calculated. The quantitative parameters, scattering, and attenuation coefficients of ultrasound in phantoms with micro‐ and nanoparticles were estimated. Based on the attenuation and scattering of ultrasound in the samples, the ultrasonic energy absorption, which determines the heating efficiency, was evaluated. Additionally, the temperature increase during sonication of the phantoms by an ultrasonic beam was directly measured using thermocouples. Results The density of the materials with nanoparticles was higher than for the materials with microparticles with the same fractions of particles. The SOS for all materials ranged from 1489 to 1499 m/s. The attenuation in the whole frequency range (3–8 MHz) was higher for the materials with nanoparticles than for the materials with microparticles. For the materials with the lower content (8 mg/ml) of particles, the attenuation coefficient was 0.2 dB/(MHz cm). For the 16 mg/ml concentration of nanoparticles and microparticles, the attenuation coefficients were 0.66 and 0.45 dB/(MHz cm), respectively. The value of backscattering coefficient in the whole frequency range was greater for the materials with microparticles than for the materials with nanoparticles. The values of the integrated backscattering coefficient were 0.05 and 0.08 1/m for the materials with nanoparticles and 0.46 and 0.82 1/m for the materials with microparticles and concentrations of 8 and 16 mg/ml, respectively. The rates of temperature increase in the first 3 s due to ultrasonic heating were higher for the materials with nanoparticles than for the materials with microparticles. Conclusions Based on acoustical measurements, we confirmed that all materials can be used as tissue phantoms in the study of ultrasonic hyperthermia, as their properties were in the range of soft tissue properties. We found that the nanoparticle‐doped materials had greater attenuation and smaller scattering of ultrasound than the materials with microparticles,...

Optical Imaging Visualizes a Homogeneous and Horizontal Band-Like Biodistribution of Large- and Small-Size Hydrophilic Compounds Delivered by Ablative Fractional Laser

“…Studies exploring optimal device settings for different clinical scenarios, in vivo delivery, and different laser types are warranted. Furthermore, there is a growing interest in the use of micro-/nanoparticles in dermatology and the synergistic use of various drug carrier systems e.g., magnetic-field-assisted delivery, nanoparticles, and physical penetration enhancers, including laser and ultrasound, which would be interesting to explore in this context [ 30 , 31 , 32 , 33 , 34 ]. In addition, future studies on in vivo human skin are necessary for the clinical utility of LADD of therapeutic antibodies using minimally invasive settings.…”

Plasmonic Stimulation of Gold Nanorods for the Photothermal Control of Engineered Living Materials

“…This concept can be expanded to include additional stimuli such as magnetic fields or ultrasound in order to create multi-stimulus ELMs. [60, 61]…”

Holographic Acoustic Tweezers for 5-DoF Manipulation of Nanocarrier Clusters toward Targeted Drug Delivery

“…Finally, is the complex pressure and its derivative over the X-, Y-, and Z-directions in the Cartesian axes are , , and , respectively. The density and speed of sound of nano particle material are 1032 kg/m 3 and 1489–1499 m/s, respectively [ 34 , 35 ]. The density and speed of sound of water are 997 kg/m 3 and 1045 m/s.…”