Ultrasonic waves from radial mode excitation of a piezoelectric disc on the surface of an elastic solid

Abstract

We discuss the ultrasonic wave propagation characteristics in an isotropic elastic solid due to the radial mode excitation of a piezoelectric disc actuator bonded to its surface. Finite element simulations using coupled electromechanical modeling is employed to investigate the wave propagation behavior. We find that the radial mode vibrations on the surface of the elastic solid generates all the three types of ultrasonic waves: longitudinal, shear, and surface waves. The waves in the solid are comprised of a central lobe and multiple side lobes based on the frequency of the radial mode excitation. The central lobe is predominantly composed of longitudinal waves and the side lobes are composed of shear waves. While the longitudinal waves have a strong central lobe and weak side lobes that are not fully developed, shear waves consists of fully developed side lobes. In addition, we observe that the longitudinal waves have fewer side lobes inside the solid compared to the shear waves. A semi-analytical approach is presented to explain the above observations. The interface traction boundary condition between the piezoelectric disc and the elastic solid is approximated as a truncated 'Bessel' excitation over the area of the piezoelectric disc in contact with the solid. A Fourier-Bessel series expansion technique is used to investigate the wave propagation behavior from the above traction boundary condition. The results obtained explain the observations from the finite element simulations with regard to the number and distribution of side lobes pertaining to the longitudinal and shear waves generated from the radial modes of the piezoelectric disc. The proposed semi-analytical approach is general and can be applied to any arbitrary axisymmetric excitations on the surface of an elastic solid.

Wireless Passive Sensor Technology through Electrically Conductive Media over an Acoustic Channel

“…This piezoelectric disc exhibited a fundamental radial mode at 215 kHz ± 5 kHz. The radial mode allowed for significantly smaller dimensions while maintaining good coupling and the focusing of the main lobe of the longitudinal wave propagation at a given operation frequency [ 28 , 29 ].…”

Development of a Low-Frequency Piezoelectric Ultrasonic Transducer for Biological Tissue Sonication

“…The propagation of ultrasonic waves in an elastic body is investigated in [ 6 ]. The study discusses the characteristics of ultrasonic wave propagation in an isotropic elastic solid material due to the radial mode excitation of a piezoelectric disk actuator connected to its surface.…”

On the numerical properties of high‐order spectral (Euler‐Bernoulli) beam elements

“…Transient wave propagation in solids and structures is encountered in several applications such as non-destructive evaluation (NDE) [13,14], structural health monitoring (SHM) [15][16][17][18], impact response [19], seismology [20], acoustics [21][22][23], and biomechanics [24] to mention just a few. In this context, ultrasonic guided waves provide a robust tool for damage detection in thin-walled flat and curved structures, such as aircraft fuselages, ship hulls, pressure vessels, and pipelines [15,16,[25][26][27].…”