Uji Performa Mesin Bensin dengan Sistem Injeksi Berbahan Bakar HCNG

Abstract

Compressed Natural Gas (CNG) is an alternative renewable fuel gasoline replacement. However, due to the low heating value, the use of CNG in the engine will reduce its performance. The addition of hydrogen gas in CNG namely hydrogen-enriched compressed natural gas is expected to increase the power of the motor. This study aims to analyze the effect of hydrogen concentration on the performance of a CNG gasoline engine. The research was conducted on the engine with an indirect fuel injection system with a volume of 124,9 cc. The parameter of the engine that measured is torque, effective power, specific fuel consumption, and effective thermal efficiency. The results showed that the small percentage of hydrogen in CNG could increase the power of the gasoline engine. Power and efficiency reach a maximum of 10% hydrogen concentration. Increasing the proportion of hydrogen in CNG fuel above 10% will significantly reduce engine torque and power. Engine performance at optimal conditions with 10% hydrogen results in torque of 2.71 Kg.m at 670 rpm, effective power of 3.28 Ps at 1055 rpm, SFCe 0.17 Kg / Ps. Hours at 770 rpm and 33.62% effective thermal efficiency at 770 rpm

Citronella Oil as Bioadditives on Si Engine Performance Characteristics

“…The graphs in figure 5 describe the specific fuel consumption for various fuel mixtures at different electrical loads. As common sense may lead, a lower SFC reflects a higher efficiency engine [29] . This observation confirms that the value of specific fuel consumption will be lower when the electrical load increases for all variations of the fuel mixture [30] .…”

Penambahan Katalis Bio Karbon Aktif Untuk Peningkatan Produksi Hdrogen Pada Elektrolisis Air

“…Selain masalah kertersediaan, bahan bakar fosil juga menghasilkan polusi dari proses pembakarannya [2]. Berbagai upaya untuk meningkatkan performasi proses pembakaran telah dilakukan, baik dari sisi peningkatan kualitas bahan bakarnya [3][4] maupun proses pembakarannya [5]. Peningkatan efisiensi pada mesin konversi energi juga sudah dilakukan untuk penghematan penggunaan energi ataupun peningkatan produksi energi [6] [7] [8].…”

Analisis Engine Propeller Matching Propulsi Kapal Ikan Tradisional Dengan Pto Generator

“…Engine propeller matching adalah menentukan titik kerja propulsi terhadap karakteristik kinerja mesin yang mana data ini diperoleh dari pengujian mesin yang dituangkan dalam data teknik main engine. Karakteristik kinerja mesin dapat dinyatakan dengan parameter hubungan antara kecepatan, torsi, konsumsi bahan bakar spesifik, dan daya keluaran mesin [11,12,13]. Nilai kebaruan dari riset ini adalah aplikasi metoda engine propeller matching untuk menganalisis kelebihan beban dan jatuhnya keluaran daya mesin utama ketika dikopel dengan PTO generator untuk penggerak pembekuan cepat.…”