Tribological Characterization of the Cutting Zone in Milling Nickel Based Alloy

Abstract

In the area of tribology, surface roughness has become one of the most important factors that contributed to the evaluation of part quality during machining operation. In order to understand the behavior of cryogenic cooling assistance in machining Inconel 718, this paper aims to provide better understanding of tribological characterization of liquid nitrogen near the cutting zone of this material in milling process. Experiments were performed using physical vapor deposition (PVD) - coated carbide inserts under cryogenic and dry cutting condition. The cryogenic results of the cutting temperature, cutting forces and surface roughness of the ball nose cutting tool have been compared with those of dry machining. Finally, experimental results proved that cryogenic implementation can decrease the amount of heat transferred to the tool up to almost 70% and improve the surface roughness to a maximum of 31% when compared with dry machining.

The Effects of Milling Factors on Surface Finish of Chromium-Molybdenum Steel

“…The previous studies for surface finish of steel such as stainless steel [1], medium carbon steel [2][3] were studied. The others material has been studied such as titanium alloy [4][5], nickel alloy [5][6], aluminum alloy [7] and polymer [8]. They conclude that conditions of milling parameters based on feed rate, cutting speed, and depth of cut could be affecting to surface finish especially in case of steel.…”