Transient Thermal Analysis of NH000 gG 100A Fuse Link Employing Finite Element Method

Abstract

In this paper, a detailed three-dimensional, transient, finite element method of fuse link NH000 gG 100 A is proposed. The thermal properties during the operation of the fuses under nominal (100 A) and custom conditions (110 and 120 A) are the main focus of the analyses that were conducted. The work concerns both the outside elements of the fuse link (ceramic body) and the elements inside (current circuit). Both the distribution of the electric current and its impact on the temperature of the construction parts of the fuses during their operating mode have been described. Temperature distribution, power losses and energy dissipation were measured using a numerical model. In order to verify and validate the model, two independent teams of scientists executed experimental research, during which the temperature was measured on different parts of the device involving the rated current. Finally, the two sets of results were put together and compared with those obtained from the simulation tests. A possible significant correlation between the results of the empirical tests and the simulation work was highlighted.

Transient Thermal Analysis of the Circuit Breaker Current Path with the Use of FEA Simulation

“…As mentioned, research works in the field of modular electrical devices are carried out, some of them quite advanced. The authors present dynamic voltage models [31,32] and CFD models [33][34][35][36][37][38][39].…”