Trans-Reflective Color Filters Based on a Phase Compensated Etalon Enabling Adjustable Color Saturation

Abstract

Trans-reflective color filters, which take advantage of a phase compensated etalon (silver-titania-silver-titania) based nano-resonator, have been demonstrated to feature a variable spectral bandwidth at a constant resonant wavelength. Such adjustment of the bandwidth is presumed to translate into flexible control of the color saturation for the transmissive and reflective output colors produced by the filters. The thickness of the metallic mirror is primarily altered to tailor the bandwidth, which however entails a phase shift associated with the etalon. As a result, the resonant wavelength is inevitably displaced. In order to mitigate this issue, we attempted to compensate for the induced phase shift by introducing a dielectric functional layer on top of the etalon. The phase compensation mediated by the functional layer was meticulously investigated in terms of the thickness of the metallic mirror, from the perspective of the resonance condition. The proposed color filters were capable of providing additive colors of blue, green, and red for the transmission mode while exhibiting subtractive colors of yellow, magenta, and cyan for the reflection mode. The corresponding color saturation was estimated to be efficiently adjusted both in transmission and reflection.

Strong Interference in Planar, Multilayer Perfect Absorbers: Achieving High-Operational Performances in Visible and Near-Infrared Regimes

“…In recent work, we theoretically demonstrated that noble metals can offer strong absorption in ultraviolet and visible (Vis) parts of the EM spectrum, while lossy metals can extend the upper-absorption edge up to the near-infrared (NIR) region [1]. Experimentally, these findings have been demonstrated in many recent research studies [17]- [44]. In one pioneering study, Mattiucci et al showed that impedance matched with thin metamaterials make metals absorbent [26].…”

“…we increase the insulator layer's refractive index, the refracted wave approaches normal incident, and consequently, the optical path difference for different incident angles decreases [99]. Another solution for this problem is to place an overlay on top of the cavity [17]. This sensitivity can be significantly suppressed in high-index, semiconductorbased cavity designs.…”

Computational design of nanostructural color for additive manufacturing

“…Generally, the physical effect that is responsible for the colorization requires an adequate fabrication method. Deposition methods are used for thin dielectric and metallic films for etalons [Park et al 2016], Fabry-Perot cavities [Yang et al 2016], or thin-film stacks [Song et al 2017]. To obtain spatially-varying colorizations or non-uniform structures, additional dry or wet etching is usually required.…”

Ultrathin Nano-Absorbers in Photovoltaics: Prospects and Innovative Applications

“…Thin film structures called "super absorbers" show a point of perfect absorption due to the complete suppression of transmission and reflection [10]. Structural color filters and reflectors with much better thermal stability, a higher color gamut, and lower angle sensitivity, compared to dye-based filters, have been realized [11,12]. Additionally, several groups have demonstrated the potential of cavity-enhanced PV [5,6,[13][14][15].…”