Tracking and Following a Tagged Leopard Shark with an Autonomous Underwater Vehicle

Abstract

This paper presents a prototype system that enables an autonomous underwater vehicle (AUV) to autonomously track and follow a shark that has been tagged with an acoustic transmitter. The AUV's onboard processor handles both real‐time estimation of the shark's two‐dimensional planar position, velocity, and orientation states, as well as a straightforward control scheme to drive the AUV toward the shark. The AUV is equipped with a stereo‐hydrophone and receiver system that detects acoustic signals transmitted by the acoustic tag. The particular hydrophone system used here provides a measurement of relative bearing angle to the tag, but it does not provide the sign (+ or −) of the bearing angle. Estimation is accomplished using a particle filter that fuses bearing measurements over time to produce a state estimate of the tag location. The particle filter combined with a heuristic‐based controller allows the system to overcome the ambiguity in the sign of the bearing angle. The state estimator and control scheme were validated by tracking both a stationary tag and a moving tag with known positions. Offline analysis of these data showed that state estimation can be improved by optimizing diffusion parameters in the prediction step of the filter, and considering signal strength of the acoustic signals in the resampling stage of the filter. These experiments revealed that state estimate errors were on the order of those obtained by current long‐distance shark‐tracking methods, i.e., manually driven boat‐based tracking systems. Final experiments took place in SeaPlane Lagoon, Los Angeles, where a 1‐m leopard shark (Triakis semifasciata) was caught, tagged, and released before being autonomously tracked and followed by the proposed AUV system for several hours. © 2013 Wiley Periodicals, Inc.

Habitat selection of a coastal shark species estimated from an autonomous underwater vehicle

“…This study is among the first to show that an AUV, integrated with acoustic receiver technology, can be used to detect in situ marine organism habitat selection (see Grothues et al 2008, Clark et al 2013). The AUV mission occurred during the peak migration of sand tigers in the Delmarva coastal ocean.…”

Factors affecting detection efficiency of mobile telemetry Slocum gliders

“…One solution to this challenge is near-real-time triangulation of the acoustic signal using a combination synthetic aperture and known test tag locations [7]. Another solution is using a combination of stereo receivers and near-realtime particle filtering [8], and multiple AUVs to geolocate the acoustic tag on meter scales [9]. These approaches…”

Underwater mobile target tracking with particle filter using an autonomous vehicle

“…The algorithm's steps are described below, which follow the notation of [8] and [17] 1. Initialization: initialize the state vector (1) for each particle and its weight associated.…”

“…Only few papers related to moving sensors (on autonomous vehicles), and for underwater applications can be found. For example, in [7] the authors use four Gliders for maritime vehicle tracking, and in [8] a procedure for animal tracking with an Autonomous Underwater Vehicle (AUV) is proposed.…”

“…However, while in [8] a method for animal tagged tracking and following is developed, by an array of two hydrophones attached on an AUV (and therefore they use the bearing measurements), we study the case where both the target and the vehicle are equipped with a very basic acoustic transponder providing only range information between target and vehicle. Moreover, we propose a complete study including performance characterization of the system and derivation of optimum values (such as speed ratio and range frequency).…”