Thermal Stability of Supercapacitor for Hybrid Energy Storage System in Lightweight Electric Vehicles: Simulation and Experiments

Abstract

Recent research findings indicate that the nonmonotonic consumption of energy from lithium-ion (Li-ion) batteries results in a higher heat generation in electrical energy storage systems. During peak demands, a higher heat generation due to high discharging current increases the temperature from 80 °C to 120 °C, thereby resulting in thermal runaway. To address peak demands, an additional electrical energy storage component, namely supercapacitor (SC), is being investigated by various research groups. This paper provides insights into the capability of SCs in lightweight electric vehicles (EVs) to address peak demands using the worldwide harmonized light-duty driving test cycle (WLTC) driving profile in MATLAB/Simulink at different ambient temperatures. Simulation results indicate that temperature imposes a more prominent effect on Li-ion batteries compared with SCs under peak demand conditions. The effect of the discharging rate limit on the Li-ion battery current is studied. The result shows that SCs can accommodate the peak demands for a low discharging current limit on the battery, thereby reducing heat generation. Electrochemical impedance spectroscopy and cyclic voltammetry are performed on SCs to analyze their thermal performance at different temperatures ranging from 0 °C to 75 °C under different bias values of -0.6, 0, 0.6, and 1 V，respectively. The results indicate a higher specific capacitance of the SC at an optimum operation temperature of 25 °C for the studied bias. This study shows that the hybrid combination of the Li-ion battery and SC for a lightweight EV can address peak demands by reducing thermal stress on the Li-ion battery and increasing the driving range.

A critical review on contemporary power electronics interface topologies to vehicle‐to‐grid technology: Prospects, challenges, and directions

“…Equivalent series resistance (ESR) is a measure of battery life cycles. The battery's ESR increases as the time required to fully charge and discharge the battery increases [179]. The battery's depth of discharge (DOD) is another crucial factor in reducing battery degeneration.…”

Analysis of the Heat Transfer Design and Thermal Management Performance for Battery Modules Combined with Liquid‐ and Forced‐Air‐Cooling Methods

“…When operated under high-temperature environments and frequent discharging and charging rates, a sharp increase in battery temperature can occur, potentially leading to thermal runaway. [4][5][6] Uneven temperature fields have been documented to ultimately yield batteries that exhibit disparate aging properties and internal resistance, thereby further compromising their capacity and lifetime. [7] Therefore, urgent and significant battery thermal management (BTM) solutions are required to ensure battery operation at the optimal temperature range with a small temperature difference.…”

Battery-Ultracapacitor Hybrid Energy Storage System to Increase Battery Life Under Pulse Loads

“…Unlike batteries, they have high power density, but less energy density. Low internal resistance and long life are the main advantages [7]- [9]. Thus, to attain substantial advantages in power and energy densities, a hybrid battery-UC storage system design is the most effective choice.…”