The Use of Contact Sponge Method to Measure Water Absorption in Earthen Heritage Treated with Water Repellents

Abstract

Earthen heritage represents an important legacy regarding construction history and technological development, with a significant cultural value that must be preserved. According to UNESCO, around 10% of the World Heritage is built using earth, and 57% of these heritage structures are in danger. Although the interest regarding earthen heritage has grown in the last few years, there is still a significant lack of knowledge in terms of material characterization, especially from conservation science point-of-view. In particular, tests regarding water absorption are always difficult to perform with a material that changes completely when in contact with water. Indeed, due to the presence of clay particles, a normal capillarity test is almost impossible to perform. Moreover, water is responsible for a significant number of degradation phenomena often found in earthen heritage. As a result, there is an urgent need to develop suitable water repellent treatments and to evaluate their efficiency. For this reason, this study focuses on the contact sponge method to assess water absorption rates for adobe and for rammed earth specimens treated with three different water repellentssiloxane, linseed oil, and beeswax. Two sets of specimens were prepared and tested, showing that this method can represent an effective way to measure initial water absorption in earthen materials, and promising results from the tested water repellent treatments were found.

An effective polymer nanocomposite based on tetraethoxysilane (TEOS) and SiO2-Al2O3 nanoparticles for super protection of damaged ancient Egyptian wall paintings

“…The measurements were performed according to the Italian Standard UNI 11432 (2011). The amount of the absorbed water was calculated according to the following equation (Ribeiro et al , 2020): where…”

Vernacular earthen buildings from Leiria, Portugal – Architectural survey towards their conservation and retrofitting

“…Surface protection from weathering agents is also important, particularly for unstabilized rammed earth walls (Bui et al, 2009) and for all adobe masonry. The application of compatible renders is preferable, however, when it is not possible, compatible and effective surface treatments can also be considered (Ribeiro et al 2020).…”

Improvement of Mechanical Properties of Compressed Earth Blocks with Stabilising Additives for Self-Build of Sustainable Housing

“…In addition, other additives can be added to improve their properties. For example, natural fibres improve thermal properties [19]; oils, fats or waxes allow waterproofing [20]; and biopolymers improve cohesion so that they improve both the strength and durability of the soil [21]. Nevertheless, the efficiency of these types of stabilisers is related to the earth's composition, so it is necessary to carry out in-depth analyses and studies to verify the viability of these materials [22].…”