The influence of a slider gap in the beam–slider structure with an MFC element on energy harvesting from the system: experimental case

Abstract

A passively self-tuning resonator configuration is presented in this study. Under certain operating conditions, a self-resonating system has the capability to passively adjust dynamical characteristics until the whole system becomes resonant. A clamped–clamped beam with an attached mass sliding along the beam and a slight gap that, under a harmonic input excitation and well-defined operating regime, can lead to the increase in voltage amplitude generated by the piezo-harvester attached to this structure may be an example of such a system. Taking into account such behavior of the system, the paper is focused on determining the distributed-parameters of the electromechanical system versus a different slider position on the beam in modal coordinates. The obtained simulation results, considering the homogenous model of an MFC element for the desired slider locations, showed how the width of the gap between the slider and the beam additionally influences the voltage generated by the piezo-harvester. Experimental tests carried out on the real stand with an EHE301 module and the designed SSHI interface circuit allowed to verify the numerical results and also showed the influence on the resistive load connected to the system for an improvement of the considered energy harvesting system parameters.

Construction of an MFC Anaerobic-Aerobic Coupled Denitrification System and Its Performance Enhancement Method

“…A microbial fuel cell (MFC) is a electricity generation device that uses enzymes or microbial tissues as the catalyst to convert the chemical energy of fuel into electrical energy [1][2][3][4][5][6][7]. Thanks to its wide range of fuel sources, mild reaction conditions, and its cleanness and environmentally friendliness, it has attracted widespread attention from scholars at home and abroad [8][9][10][11][12][13][14][15].…”

Numerical Analysis and Experimental Verification of Damage Identification Metrics for Smart Beam with MFC Elements to Support Structural Health Monitoring

“…Many investigations in this field have shown that one-layer piezoelectric patches or piezo harvesters with lightweight fiber materials allow identifying changes in different kinds of vibrating structures [12][13][14][15][16]. The relevant properties of these element, especially their fragility or extreme value effects allow to use them in many applications to monitor structure or detect damage [17][18][19][20][21].…”