The hybrid Photovoltaic-Thermal double-pass solar system for drying applications

Abstract

In this paper, is devoted to evaluating the performance of the double-pass hybrid Photovoltaic-Thermal (PVT) solar system proposed for drying purposes theoretically and experimentally as well as the system is designed, fabricate and modeled in order to simulate the productivity of this system. The hot air extracted from the PVT collector can be used as a heat source for the drying application. The critical parameter such as temperature distribution, useful heat gain, electrical power, and thermal efficiency are computed using MATLAB 2015b program built for this purpose. Results show that the higher output fluid temperature was 63°C at a lesser mass flow rate which 0.017 kg/s and the maximum efficiencies of electrical, thermal and overall at a higher mass flow rate which reached 12.65%, 56.73%, and 85% respectively at mass flow rate 0.031 kg/s. In addition, the optimum electrical power and thermal energy reached 50.57 W and 389.37 W at 0.031 kg/s.

Experimental and model validation of photovoltaic-thermal (PVT) air collector: exergy analysis

“…Now, exergy analysis is widely used in solar energy assessment such as solar drying systems, solar collectors, and PVT systems [8]. Jadallah et al [9] designed, fabricate, and modeled for double-pass PVT collectors for drying applications. In the diverse weather conditions, Zoukit et al [10] constructed and forecasted an indirect form of solar dryer that functions in both forced and natural convection modes.…”