The Effects of Hot Blocks Geometry and Particle Migration on Heat Transfer and Entropy Generation of a Novel I-Shaped Porous Enclosure

Abstract

This paper studied the cooling performance of a hot electronic chip using nanofluids (NF) mixed convection, implementing Buongiorno’s model of the NF simulation. The NF were assumed water-Al2O3 nanoparticles (NP) in the range of 0 to 4% of volume concentration. Six different problems of the combinations of three internal hot blocks, including triangular, square, and circular geometries, and two porous media, including sand and compact metallic powder, were numerically solved. To discretize the governing equations, a finite control volume method was applied. As most of the proposed correlations for the thermophysical properties of the NF were inaccurate, especially for thermal conductivity, a new predictive correlation was proposed using the multi-variable regression method with acceptable accuracy. It was found that the cooling performance improved with any increase in the NP loading. A higher nanoparticle concentration yielded better cooling characteristics, which was 11.93% for 4% volume. The sand porous medium also yielded a much higher value of the normalized Nusselt number (Nu) compared to the other medium. The entropy generation (EG) enhancement was maximum for the triangular hot block in a sand porous cavity.

Heat and Flow Control in Cavity with Cold Circular Cylinder Placed in Non-Newtonian Fluid by Performing Finite Element Simulations

“…Work available in the literature on heat transfer characteristics in multiple domains under different physical circumstances is encapsulated in refs. [27][28][29][30][31][32][33][34][35][36][37][38][39][40][41].…”