The 3-PPPS Parallel Robot with U-Shape Base, a 6-DOF Parallel Robot with Simple Kinematics

Abstract

Abstract. One of the main problems associated with the use of 6 DOF parallel robots remains the solving of their kinematic models. This is rarely possible to analytically solve their models thereby justifying the application of numerical methods. These methods are difficult to implement in an industrial controller and can cause solution bifurcations close to singularities resulting in following an unplanned trajectory. Recently, a 3-PPPS robot with U-shaped base was introduced where an analytical kinematic model can be derived. Previously, quaternion parameters were used to represent the orientation of the mobile platform. To allow for simpler model handling, this article introduces the use of Euler angles which have a physical meaning for the users. Compact writing of the direct and inverse kinematic model is thus obtained. Using algebraic and cylindrical decomposition for the workspace, this provides a simpler representation of the largest domain without singularity around the "home" configuration.

Self-Motion of the 3-PPPS Parallel Robot with Delta-Shaped Base

“…In [15], the robot was made with an equilateral mobile platform and an equilateral-shape base. In [17,18], the robot was designed with an equilateral mobile platform and a U-shaped base. For this design, the Direct Kinematic Model (DKM) is simple and can be solved with only quadratic equations.…”