Temperature dependence of a magnetically levitated electromagnetic vibration energy harvester

Abstract

This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain. Abstract Electromagnetic vibration energy harvesters including magnetically levitated devices where opposing magnets are used to form the spring have been well documented. The strength of the magnets naturally has a large influence on the dynamic characteristics and output power of such harvesters. However, it can be affected by ambient temperatures which vary from applications to applications. This paper presents investigation into the performance of a magnetically levitated electromagnetic energy harvester under various ambient temperatures. Parameters investigated include magnetic flux density, resonant frequency, damping ratio, open circuit output voltage, velocity of the relative motion and the load resistance. Both simulation and experimental results show that these properties vary with ambient temperatures. The magnetic flux density reduces as the temperature increases which results in lower resonant frequency, lower relative velocity, lower open circuit output voltage and higher damping ratio. Varying resonant frequencies with temperature can lead to harvesters being de-tuned from the target vibration frequency. Decreasing magnetic field strength and increased damping ratios will also reduce output power even if the harvester's resonant frequency still matches the environmental vibration frequency. The power transferred to the electrical load will be reduced due to the variation in the optimal load resistance with temperature. This means the harvester is no longer matched to achieve the maximum harvested power. The specified maximum operating temperature of the magnets was found to lead to partial demagnetisation. When cycling from room to the maximum specified temperature, the magnetic field was initially found to fall but remained constant thereafter. Harvesters were found to operate beyond the specified maximum operating temperature of the magnet, but suffer from a reduced magnetic strength.

High-Temperature Self-Powered Sensing System for a Smart Bearing in an Aircraft Jet Engine

“…piezoelectric [13], magnetostrictive [14], and ferroelectric [15]) and electromechanical coupling mechanisms (e.g. electrostatic and electromagnetic [16]) have been mostly used in temperatures below 80 • C. The performance of these harvesters is dependent of magnitude and the frequency of external vibration [13]. Due to elevated temperature close to the bearing, active materials have not been considered.…”

Review of vibration-based energy harvesting technology: Mechanism and architectural approach

“…The EH measures 23.5 cm 3 , generating 400 μW with an excitation frequency of 2 Hz and vibration amplitude of 2 cm. 88 3.3 | Spiral or diaphragm (out of plane) Spiral or diaphragm EHs are considered an advancement following their cantilever counterparts, due to the former's compactness and multimodal properties. The generator dimensions, stator (tubular housing), translation motion parameter, circuit load resistance, and resonating frequency were fine-tuned for optimised performance.…”

Study on Wind Energy Harvesting Effect of a Vehicle-Mounted Piezo-Electromagnetic Hybrid Energy Harvester

“…Traveling on roads, vehicles will inevitably generate a lot of recyclable energy [1,2], and cars are equipped with many lowpower microelectronic devices and wireless sensors [3,4], which provides an application foundation for applying micro energy harvesters to cars. There are several forms of recyclable energy generated during driving, such as vibration energy, wind energy, heat energy, and even solar energy [5,6]. Among them, vibration energy and wind energy have the characteristics of high recyclability and convenient recovery during driving [4].…”