Task Space Model Predictive Control for Vineyard Spraying with a Mobile Manipulator

As the demand for service robots increases, a mobile manipulator robot which can perform various tasks in a dynamic environment attracts great attention. There are some controllers that control mobile platform and manipulator arm simultaneously for efficient performance, but most of them are difficult to apply universally since they are based on only one mobile manipulator model. This lack of versatility can be a big problem because most mobile manipulator robots are made by connecting a mobile platform and manipulator from different companies. To overcome this problem, this paper proposes a simultaneous controller which can be applied not only to one model but also to various types of mobile manipulator robots. The proposed controller has three main characteristics, which are as follows: (1) establishing a pose that motion planning can be carried out in any position, avoiding obstacles and stopping in a stable manner at the target coordinates, (2) preventing the robot from collision with surrounding obstacles while driving, (3) defining a safety area where the manipulator does not hit the obstacles while driving and executing the manipulation accordingly. Our controller is fully compatible with Robot Operating System (ROS) and has been used successfully with three different types of mobile manipulator robots. In addition, we conduct motion planning experiments on five targets, each in two simulation worlds, and two motion planning scenarios using real robots in real-world environments. The result shows a significant improvement in time compared to existing control methods in various types of mobile manipulator and demonstrates that the controller works successfully in the real environment. The proposed controller is available on GitHub.

Section: Related Workmentioning

confidence: 99%

Navigation Path Based Universal Mobile Manipulator Integrated Controller (NUMMIC)

Kim

Yang

et al. 2022

“…In this way, we attempt to minimize the waste generated by spraying while maintaining satisfactory coverage. More details about the first experiments and effectiveness of the controlled spraying approach can be found in [24].…”

Section: Vineyard Sprayingmentioning

confidence: 99%

Heterogeneous Autonomous Robotic System in Viticulture and Mariculture: Vehicles Development and Systems Integration

Kapetanović

Goričanec

Vatavuk

et al. 2022

Self Cite

There are activities in viticulture and mariculture that require extreme physical endurance from human workers, making them prime candidates for automation and robotization. This paper presents a novel, practical, heterogeneous, autonomous robotic system divided into two main parts, each dealing with respective scenarios in viticulture and mariculture. The robotic components and the subsystems that enable collaboration were developed as part of the ongoing HEKTOR project, and each specific scenario is presented. In viticulture, this includes vineyard surveillance, spraying and suckering with an all-terrain mobile manipulator (ATMM) and a lightweight autonomous aerial robot (LAAR) that can be used in very steep vineyards where other mechanization fails. In mariculture, scenarios include coordinated aerial and subsurface monitoring of fish net pens using the LAAR, an autonomous surface vehicle (ASV), and a remotely operated underwater vehicle (ROV). All robotic components communicate and coordinate their actions through the Robot Operating System (ROS). Field tests demonstrate the great capabilities of the HEKTOR system for the fully autonomous execution of very strenuous and hazardous work in viticulture and mariculture, while meeting the necessary conditions for the required quality and quantity of the work performed.

“…In viticulture, monitoring and manipulation tasks are envisioned to be performed by a robotic system consisting of a mobile manipulator and an unmanned aerial vehicle. Manipulation tasks that the project aims to provide a solution to are autonomous robotic spraying, which we discuss in [ 3 ], and suckering, which is the focus of this paper.…”

Section: Introductionmentioning

confidence: 99%

Direct Drive Brush-Shaped Tool with Torque Sensing Capability for Compliant Robotic Vine Suckering

Vatavuk

Stuhne

Vasiljević

et al. 2023

Self Cite

In this paper, we present a direct drive brush-shaped tool developed for the use of robotic vine suckering. Direct drive design philosophy allows for precise and high bandwidth control of the torque exerted by the brush. Besides limiting the torque exerted onto the plant, this kind of design philosophy allows the brush to be used as a torque sensor. High bandwidth torque feedback from the tool is used to enable a position controlled robot arm to perform the suckering task without knowing the exact position and shape of the trunk of the vine. An experiment was conducted to investigate the dependency of the applied torque on the overlap between the brush and the obstacle. The results of the experiment indicate a quadratic relationship between torque and overlap. This quadratic function is estimated and used for compliant trunk shape following. A trunk shape following experiment demonstrates the utility of the presented tool to be used as a sensor for compliant robot arm control. The shape of the trunk is estimated by tracking the motion of the robot arm during the experiment.