Tailoring Mission Effectiveness and Efficiency of a Ground Vehicle Using Exergy-Based Model Predictive Control (MPC)

Abstract

To ensure dominance over a multi-domain battlespace, energy and power utilization must be accurately characterized for the dissimilar operational conditions. Using MATLAB/Simulink in combination with multiple neural networks, we created a methodology which was simulated the energy dynamics of a ground vehicle in parallel to running predictive neural network (NN) based predictive algorithms to address two separate research questions: (1) can energy and exergy flow characterization be developed at a future point in time, and (2) can we use the predictive algorithms to extend the energy and exergy flow characterization and derive operational intelligence, used to inform our control based algorithms or provide optimized recommendations to a battlefield commander in real-time. Using our predictive algorithms we confirmed that the future energy and exergy flow characterizations could be generated using the NNs, which was validated through simulation using two separately created datasets, one for training and one for testing. We then used the NNs to implement a model predictive control (MPC) framework to flexibly operate the vehicles thermal coolant loop (TCL), subject to exergy destruction. In this way we could tailor the performance of the vehicle to accommodate a more mission effective solution or a less energy intensive solution. The MPC resulted in a more effective solution when compared to six other simulated conditions, which consumed less exergy than two of the six cases. Our results indicate that we can derive operational intelligence from the predictive algorithms and use it to inform a model predictive control (MPC) framework to reduce wasted energy and exergy destruction subject to the variable operating conditions.

Construction of Short-Term Traffic Flow Prediction Model Based on IoT and Deep Learning Algorithms

“…Based on the model predictive control (MPC) framework, the predictive model predicts the future traffic dynamics, and the potential control performance of the candidate scheme is calculated [25,26]. In the current control cycle, the first element of the optimization sequence is applied to the traffic system model and restarts the next round of the rolling optimization process based on the feedback traffic status and prediction model.…”