Synthesis and tribological property of Ti3C2T X nanosheets

Preparation of TiO2/Ti3C2Tx hybrid nanocomposites and their tribological properties as base oil lubricant additives

“…The XRD patterns of product verify the formation of Ti 3 C 2 T x phase. 28,36,37 The strong peaks were found around 9.0 and 18.2 corresponding to (002) and (004) of Ti 3 C 2 T x , which shi to lower 2q angles contrasting to the diffraction of Ti 3 AlC 2 , manifesting the expansion along c-axis. Owing to the weak metallic bonding between Ti and Al, the Al layer is exfoliated by selective etching off Ti 3 AlC 2 .…”

“…[14][15][16] Lately, Naguib et al 17,18 reported to fabricate twodimensional Ti 3 C 2 (OH) 2 nanosheets by selectively etching the Al layers with hydrouoric acid (HF), following a similar process, other MAX phases have also been successfully exfoliated into the two-dimensional transition metal nanocarbides and nanonitrides named Mxenes, [19][20][21] theoretical and experimental investigation revealed that their properties distinct from those of their 3D MAX counterparts. [22][23][24][25][26][27][28][29] Over the past decades, TiO 2 , as a typical member of inorganic transition metal dioxides, has aroused numerous studies due to its attractive functional properties and promising applications. Furthermore, various hybrid modications including surface modication, coupling with porous materials, and carbon coating have been executed to TiO 2 nanostructures in order to improve the properties.…”

High volumetric energy density annealed-MXene-nickel oxide/MXene asymmetric supercapacitor

“…The exfoliated Ti 3 C 2 T x MXene, as seen in Fig. 4a-c, presents a 0.352 nm lattice fringe spacing corresponding to anatase TiO 2 (101) and the corresponding SAED patterns shows the hexagonal symmetry of the akes and single-crystal nature of the modied Ti 3 C 2 T x MXene, [48][49][50] suggesting that the TiO 2 particles are nucleated on the external or interior Ti 3 C 2 T x MXene layers, which agrees well with the Ti 3 C 2 T x MXene XRD analysis. Fig.…”

Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage

“…Very recently, Ti 3 C 2 T x materials, which possess substantial chemical and structural variety, have been explored as promising stars in various applications including energy storage, hydrogen evolution reactions, oxygen evolution reactions (OER), light‐to‐heat conversion, water purification, and electromagnetic interference, among many others ( Figure ) . Due to the excellent electromagnetic wave absorption capacity, 2D Ti 3 C 2 T x has been utilized as a light‐to‐heat conversion material .…”