Survey of the Ridracoli Dam: UAV–based photogrammetry and traditional topographic techniques in the inspection of vertical structures

Abstract

The inspection of strategic works such as dams is of vital importance both for their maintenance and for the safety of downstream populations. The reduced accessibility, both for uptake needs and for their strategic nature, and the large time needed for an inspection by traditional method do not facilitate the investigation of this type of structures. The new unmanned aerial vehicle (UAV) technology, equipped with high-performance cameras, allows for rapid photographic coverage of the whole dam system. Apart from the placement on the structure of a high number of markers, the correct geo-referencing and validation of the model also requires an important terrestrial topographic campaign by total station, Global Positioning System and laser scanner. Punctual, linear and surface analysis shows the high accuracy of the drone acquiring technique. The product is suitable for a detailed survey of the conservation status of the materials and the complete metric reconstruction of the dam system and the adjacent land. The present work explains firstly a UAV acquisition and then the first dense point cloud validation procedure of a concrete arch gravity dam. The Ridracoli dam is the object of the survey, located in the village of Santa Sofia in central Italy.

The Suitability of UAS for Mass Movement Monitoring Caused by Torrential Rainfall—A Study on the Talus Cones in the Alpine Terrain in High Tatras, Slovakia

“…UASs have been previously used for many applications, including monitoring of changes in the morphology of a volcano [4], landslides [5,6], dam and riverbed erosion [7][8][9], slow landslides [10], risks associated with surface mining [11], slope stability in the vicinity of railways [12], or speed of glacier movement [13,14].…”

Water Level Measurements from Drones: A Pilot Case Study at a Dam Site

“…The mean value of all standard deviations was equal to 1.0 cm, 1.0 cm and 0.8 cm along each of the three directions, respectively. For a detailed description of the traditional topographic survey, the reader can refer to Buffi et al [38,39]. The deployment of GCPs could represent one major …”

Reviewing Arch-Dams’ Building Risk Reduction Through a Sustainability–Safety Management Approach

“…The monolithic model ensures the continuity between adjacent blocks. The rigid connection between them is ensured by means of vertical joints, which are modelled by surface-based "tie" constraints that account the translational and rotational degrees of freedom [53][54][55]. Considering a series of monolithic, the model can be called "multi-monolithic model" [56].…”

“…The surface-to-surface joint model simulates the discontinuity between blocks along the contact surfaces. The contact model describes tangential and normal behaviour by adopting a coefficient of friction and contact pressures transmitted from surfaces [54,55].…”

“…The solid element joint model simulates the joints, connected to the ashlars, as independent solid elements, separating the discontinuity surface and spacing the blocks. These joints are characterized by mechanical models (i.e., elastic or elasto-plastic model) [54,55].…”