Surface Characterization and Cell Adhesion of Different Zirconia Treatments: An in vitro Study

Abstract

Aim:The aim of this study was to characterize the surface of zirconia subjected to different treatments and evaluate its effect on cell adhesion and proliferation. Materials and methods:A total of 80 zirconia disks were divided into four groups (n = 20) according to the surface treatments used: group I: as-sintered (AS), no surface treatment applied; group II: abrasion treatment applied using Rocatec (ROC; 3M ESPE) system with silica-coated alumina powder of grit size 110 μm; group III: erbium, chromium:yttrium, scandium, gallium, garnet (Er, Cr:YSGG) laser (LAS; BIOLASE) was used at a frequency of 20 Hz and output power of 3 W; and group IV: specimens were subjected to the selective infiltration etching (SIE) technique. Surface characterization was evaluated for the different groups (roughness, hardness, and morphology), and cell behavior (adhesion and proliferation) was tested (α = 0.05). Results:The ROC group reported a significant increase in surface roughness (2.201 ± 0.352) and Vickers hardness (1758 ± 16.6) compared with the other surface treatments. The SIE surface-treated group reported a significantly higher number of cells (64.5 ± 2.6 and 53.5 ± 2.2 respectively) compared with the other surface-treated groups. Conclusion:The SIE is a promising surface treatment for zirconia that significantly enhances cell adhesion and osseointegration.Clinical significance: The SIE treatment of zirconia implants may help in a faster and better osseointegration.

Fabrication and Characterization of Gas Sensor from ZrO2: MgO Nanostructure Thin Films by R.F. Magnetron Sputtering Technique

“…The technique used to prepare ZrO 2 : MgO was by plasma spraying which is Radiofrequency (R.F) magnetron sputtering plasma technique. This technique is considered as one of the best physical deposition methods due to its high control label on the films prepared from it, deposition stability and uniform films (13). Many researchers have studied and categorized this material.…”