Structure, properties and application of alloys of the Al – Mg – Si – (Cu) system

Structure and Properties of Sheets from New Al–Mg–Si Alloy V-1381

“…The analysis of the patent studies, scientific and engineering literature, and studies of the alloys of the system in question [8,9,[11][12][13][14][15] allowed choosing ten experimental compositions of the new Al-Mg-Si alloy (Table 1). The main alloying elements are magnesium, silicon, copper, and manganese.…”

“…Another advantage of the alloys of this alloying system is their enhanced workmanship, which allows performing cold bending and punching operations and also avoiding additional re-quenching of assembled structural elements usually made from duralumins in the annealed state because of the low formability of sheets from such alloys as D16chT and 1163T [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].…”

Structure and mechanical behavior ofin situdeveloped Mg2Si phase in magnesium and aluminum alloys – a review

“…The extruded aluminum alloy (6000 series) is also used in bus and heavy truck components in drive shas, transmission parts, air intake manifolds, sun roofs, and air bag modules. Kolobnev et al 94 reported an Al-0.3Mg-0.5Si alloy with a low (0.5-0.8%) content of copper to enhance its hardness upon articial aging at 180 C. Moreover, this alloy can be used for a long time (4300 h) at 90 C (for example, in an automobile radiator). Fig.…”

Influence of Aging on Corrosion Behaviour of the 6061 Cast Aluminium Alloy

“…Al–Mg–Si alloys with excellent corrosion resistance, weldability, and formability, are widely used in transportation and other fields [ 1 , 2 ]. In Al–Mg–Si alloys, Mg 2 Si phases improve the hardness and mechanical performance [ 3 , 4 ], while Cu- and Fe- rich intermetallic phases were the inevitable inclusion origin from the smelting process [ 5 , 6 , 7 ].…”