Structural characterization of TiN/NbN multilayers: X‐ray diffraction, energy‐filtered TEM and Fresnel contrast techniques compared

Abstract

SummaryTwo TiN/NbN multilayers with wavelength 13.6 and 6.15 nm have been characterized by X-ray diffraction (XRD), Fresnel contrast analysis (FCA) and energy-filtered transmission electron microscopy (EFTEM). Good agreement between the composition profile obtained by FCA and EFTEM is obtained if the lower resolution of the EFTEM images is taken into account. The relative advantages and disadvantages of the techniques are discussed. Used together the two TEM techniques provide a quantitative characterization that is consistent with, and for some parameters provides more precise values than, that from XRD. The analysis shows that the multilayers have narrow interfaces (< 1 nm) and a composition amplitude close to 95% for the longer wavelength.

In situ synthesis of a graphene/titanium nitride hybrid material with highly improved performance for lithium storage

“…2b shows the XRD pattern of G/TiN. The diffraction peak at 26 could be attributed to the G. The other three diffraction peaks at 36 , 43 , 62 are indexed to be TiN (111), (200), (220) diffraction peaks, 25 respectively. No obvious evidences of impurities such as metallic titanium or titanium oxides, can be found in the XRD pattern.…”

Multilayered Materials: A Palette for the Materials Artist

“…Its ability to create images at this resolution makes it complementary to nonlocal techniques, such as Xray diffraction, that measure the structure "averaged" over micrometers. 12 The wide range of material parameters that can be obtained from the same area of specimen in a state-of-the-art TEM today is due to the large number of specimen-beam interactions. 11 However, the strong interaction of the electrons with the specimen under study places a crucial limitation on the technique (the electrons only penetrate a few hundred nanometers of material), hence it is necessary to make a thin foil (ca.…”

Wear mechanisms of the biotribological nanocomposite a‐C : H coatings implanted by metallic nanoparticles

“…Such coatings can extend both the life‐time of structures and add additional functionalities to coated systems. Smart coatings are designed to respond to the environment and thus enhance the coating's life and functionality (Nowakowski et al ., ; Momeni & Tillmann, ; Lloyd et al ., ; Martin, ; Major et al ., ,b). In recent years, in addition to diamond, materials such as diamond‐like carbon (DLC) or amorphous carbon (a‐C:H) have emerged as potential materials for biotribological coatings due to their high hardness, low friction coefficient, high wear and corrosion resistance, chemical inertness, high electrical resistivity, infrared transparency, high refractive index, and excellent smoothness.…”