Spectral CT Using Multiple Balanced K-Edge Filters

Abstract

Our goal is to validate a spectral CT system design that uses a conventional X-ray source with multiple balanced K-edge filters. By performing a simultaneously synthetic reconstruction in multiple energy bins, we obtained a good agreement between measurements and model expectations for a reasonably complex phantom. We performed simulation and data acquisition on a phantom containing multiple rods of different materials using a NeuroLogica CT scanner. Five balanced K-edge filters including Molybdenum, Cerium, Dysprosium, Erbium, and Tungsten were used separately proximal to the X-ray tube. For each sinogram bin, measured filtered vector can be defined as a product of a transmission matrix, which is determined by the filters and is independent of the imaging object, and energy-binned intensity vector. The energy-binned sinograms were then obtained by inverting the transmission matrix followed by a multiplication of the filter measurement vector. For each energy bin defined by two consecutive K-edges, a synthesized energy-binned attenuation image was obtained using filtered back-projection reconstruction. The reconstructed attenuation coefficients for each rod obtained from the experiment was in good agreement with the corresponding simulated results. Furthermore, the reconstructed attenuation coefficients for a given energy bin, agreed with National Institute of Standards and Technology reference values when beam hardening within the energy bin is small. The proposed cost-effective system design using multiple balanced K-edge filters can be used to perform spectral CT imaging at clinically relevant flux rates using conventional detectors and integrating electronics.

CAMPO Precision128 Max ENERGY Spectrum CT Combined with Multiple Parameters to Evaluate the Benign and Malignant Pleural Effusion

“…Utilizing the power of high-energy X-rays, the level of the image can reduce hardening artifacts but weaken the contrast between tissue resolutions. For a single energy image at the same level, the absorption coefficient of a substance is determined by its own density, so as to ensure the consistency of the material attenuation coefficient of the same organizational structure, avoid the generation of hardening artifacts, and obtain accurate CT value [ 22 , 23 ]. The main components of benign and malignant pleural effusion include protein content, cell count, blood fine clot, and enzyme content .The CT values of benign and malignant pleural effusions are significantly different at different single energy levels.…”

K-edge subtraction imaging for coronary angiography with a compact synchrotron X-ray source

“…The advantage of this method is that the filter pairs provide a very well-defined and sharp energy window [27]. Yet, a large amount of the X-ray flux is absorbed in the filters reducing the statistics in the images [28]. Until now, only very simple phantoms have been measured using this method, further development is therefore needed.…”

A Novel Low-Dose Dual-Energy Imaging Method for a Fast-Rotating Gantry-Type CT Scanner

“…For the filter material, Sn was used which was found to be an ideal material for its cost, machinability, and good energy separation performance [53]- [55]. Beam-filter thickness has a direct impact on the amount of mean energy shift and the surviving number of photons.…”