Sodium Hydroxide/Silane Treated Kenaf Fibre in Unsaturated Polyester Matrix: Effects of Fibres Length and Fibres Loading Towards The Composites Flexural and Morphological Properties

Abstract

The fibre behaviour is a critical aspect that will determine the deformation of the composite since it highly relies on its physical and chemical properties. This paper focus on the effect of similar fibres aspect ratio (L/D) with different length of untreated Kenaf fibre and SodiumHydroxide/silane treated Kenaf fibres on the flexural properties of the composites. The treated and untreated kenaf fibre at two different fibre lengths (A: 0.4 cm and B: 2.9 cm) were fabricated at low filler loadings (5,10,15%) and high filler loadings (45,50,55%). The results showed an improvement in the flexural stress (7-44 %) and modulus (6-46 %) with the application of treatments for both A- and B- fibre categories. The optimum result was achieved from the treated samples at a shorter A-fibre composite, although the aspect ratio between A and B-fibre samples are similar. The chemical treatment coalition might improve the surface interaction and, at shorter fibre length, it affects the fibres compact-ability that led to an improvement in stress distribution and low voids formation as supported by the observation on the composite's fractured surface where traces of matrix observed on the surface of pull-out fibres. From the fractographic analysis, the fibres morphological condition before the fabrication is one of the important factors to consider since it can affect the end-properties of the composites.

The Evolution and Future Trends of Unsaturated Polyester Biocomposites: A Bibliometric Analysis

“…Its popularity can be attributed to the low-cost infrastructure required, ease of modification (such as by changing the alkali solution concentration, temperature, or treatment time), and ease of accessibility of the chemical products required. In some occasions, alkaline treatments were combined with other fiber modifications such as silane treatment [52] to improve the mechanical behavior of the UPR biocomposites. The use of fibers obtained from less-common vegetable sources was first observed in the work of Owolabi et al (1985) [39], who evaluated short coconut fibers as reinforcements.…”

Influence of Treatments on the Mechanical Properties of Epoxy Resin Hybrid Composites Reinforced with Pineapple Fiber and Snail Shell Particulates

“…Additionally, improper drying, seasoning and other processing techniques can result in severe issues related to mechanical defects-cracks, brittleness or lowered strength-of the agricultural material (Ijabo et al, 2019;Nwanze and Uguru, 2020). Several chemicals are being used to modify the engineering properties of organic materials and improve the mechanical attributes (Owen et al, 2018;Baarimah et al, 2021;Mohd Ghaztar et al, 2022). These amendments are frequently embarked upon to improve the bio-materials engineering characteristics-strength, durability, flame resistance, and dimensional stability.…”