SLA Resins Modification by Liquid Mixing with Ceramic Powders Aiming at Mechanical Property and Thermal Stability Enhancement for Rapid Tooling Applications

Abstract

Stereolithography (SL) additive manufacturing process provides increased dimensional precision, smooth surface finish and printing resolution range in the order of magnitude of 100 μm, allowing to obtain intricate 3D geometries. The incorporation of ceramic-based inclusions within liquid resins enhances the thermal and mechanical properties of the final 3D printed component while improving the surface finishing of the final parts; in this way, it expands the range of process applications and reduces the post-processing steps. The proposed approach investigates the bulk modification of commercial SLA resins mixed with ceramic powders of Al2O3 (grain size 1–10 μm) and SiO2 (grain size 55–75 nm) aiming to improve 3D printed parts performance in terms of mechanical properties, dimensional stability and surface finishing compared with pure, unmodified resins. The produced materials were used for the development of inserts for injection moulding and were examined for their performance during the injection moulding process. The addition of particles in the nano- and micro-range is being employed to improve parts performance for rapid tooling applications whilst maintaining 3D printing accuracy, thermal and mechanical properties as well as achieving a smooth surface finishing compared with unmodified resins.

3D and 4D Printing as Integrated Manufacturing Methods of Industry 4.0

“…In addition, the method is confined to epoxy or acrylic based resins, the majority of which shrink following polymerization. SLA printers can achieve greater resolution and a more complicated structure for photo cross-linkable materials (Li et al, 2022;Valencia et al, 2022;Karatza et al, 2022). Figure 2 depicts a schematic of the SLA 3D printing method.…”