Abstract:ResumoPolímeros Molecularmente Impressos (MIPs) são polímeros sintéticos que apresentam alta seletividade a uma molécula de interesse. O objetivo deste trabalho foi a síntese e caracterização de MIPs para aplicação na extração em fase sólida (SPE), visando a determinação de fenilalanina. Os MIPs foram sintetizados a partir do MAA, fenilalanina, EGDMA, AIBN, em clorofórmio. Também foi sintetizado o polímero não-impresso (NIP), para controle da seletividade dos MIPs. A dessorção da fenilalanina foi realizada em … Show more
“…O conceito de impressão molecular surgiu a partir da teoria de Pauling, na qual um antígeno desempenharia o papel de molécula molde para moldar a cadeia polipeptídica de anticorpos, dando origem a estruturas complementares altamente seletivas. 11,12 A partir desta teoria, outros pesquisadores desenvolveram metodologias para a preparação de materiais adsorventes com afinidades específicas para algumas substâncias como Wulff e Sarhan em 1972, 13 que obtiveram o primeiro resultado positivo no uso de polímeros impressos enantioseletivos para ácido glicérico. As interações entre a molécula (ácido glicérico) e os monômeros funcionais eram de natureza covalente, apresentando uma alta seletividade.…”
Section: Resultsunclassified
“…Com a remoção da molécula molde, o polímero resultante possuirá microcavidades com tamanhos uniformes, capazes de reter seletivamente a molécula molde, quando esta estiver presente em uma amostra complexa. 12,20 O princípio de preparação do MIP é bastante simples, mas se não houver uma combinação adequada dos componentes da reação, bem como o tipo de procedimento empregado na síntese, o polímero resultante pode obter características indesejáveis tanto para a morfologia, quanto para os locais seletivos. 20,22 Visto a seletividade apresentada pelo sítio específico gerado durante sua síntese, o MIP tem sido utilizado como uma ferramenta promissora para o desenvolvimento de sistemas com reconhecimento semelhante ao de sistemas biológicos específico-seletivos como antígeno-anticorpo e/ou enzimasubstrato.…”
Quality control of medicines is of extreme importance since its use is carried out on a large scale throughout the world, and any errors in its production directly affect the effectiveness of the same, as well as the people who use them. Therefore, the search for more sensitive, selective, lower cost and easy handling methods is essential for this control to be done efficiently. Among the techniques that present such characteristics, electroanalytical techniques stand out, especially with the use of modified sensors, both for determination and for quantification of drugs. One of the modifiers that see gaining space in this area are molecularly printed polymers (MIPs), which appear as a promising tool for the development of systems with biomimetic recognition, similar to specific systems (antigen-antibody). The advantages of MIPs relative to biological materials include easy and low cost preparation and simple storage, which often occurs at room temperature for long periods of time. Despite the diversity of work involving MIPs in the preparation of samples in general, their application as modifying agents in sensors for any analyte is still restricted. Thus, the present review aims to evaluate the application of modified MIP sensors for the determination of drugs in biological and pharmaceutical samples and the progress of this analytical methodology in the present time.
“…O conceito de impressão molecular surgiu a partir da teoria de Pauling, na qual um antígeno desempenharia o papel de molécula molde para moldar a cadeia polipeptídica de anticorpos, dando origem a estruturas complementares altamente seletivas. 11,12 A partir desta teoria, outros pesquisadores desenvolveram metodologias para a preparação de materiais adsorventes com afinidades específicas para algumas substâncias como Wulff e Sarhan em 1972, 13 que obtiveram o primeiro resultado positivo no uso de polímeros impressos enantioseletivos para ácido glicérico. As interações entre a molécula (ácido glicérico) e os monômeros funcionais eram de natureza covalente, apresentando uma alta seletividade.…”
Section: Resultsunclassified
“…Com a remoção da molécula molde, o polímero resultante possuirá microcavidades com tamanhos uniformes, capazes de reter seletivamente a molécula molde, quando esta estiver presente em uma amostra complexa. 12,20 O princípio de preparação do MIP é bastante simples, mas se não houver uma combinação adequada dos componentes da reação, bem como o tipo de procedimento empregado na síntese, o polímero resultante pode obter características indesejáveis tanto para a morfologia, quanto para os locais seletivos. 20,22 Visto a seletividade apresentada pelo sítio específico gerado durante sua síntese, o MIP tem sido utilizado como uma ferramenta promissora para o desenvolvimento de sistemas com reconhecimento semelhante ao de sistemas biológicos específico-seletivos como antígeno-anticorpo e/ou enzimasubstrato.…”
Quality control of medicines is of extreme importance since its use is carried out on a large scale throughout the world, and any errors in its production directly affect the effectiveness of the same, as well as the people who use them. Therefore, the search for more sensitive, selective, lower cost and easy handling methods is essential for this control to be done efficiently. Among the techniques that present such characteristics, electroanalytical techniques stand out, especially with the use of modified sensors, both for determination and for quantification of drugs. One of the modifiers that see gaining space in this area are molecularly printed polymers (MIPs), which appear as a promising tool for the development of systems with biomimetic recognition, similar to specific systems (antigen-antibody). The advantages of MIPs relative to biological materials include easy and low cost preparation and simple storage, which often occurs at room temperature for long periods of time. Despite the diversity of work involving MIPs in the preparation of samples in general, their application as modifying agents in sensors for any analyte is still restricted. Thus, the present review aims to evaluate the application of modified MIP sensors for the determination of drugs in biological and pharmaceutical samples and the progress of this analytical methodology in the present time.
“…The synthesis of these materials occurs as a function of a template molecule by non-covalent or covalent bonds, enabling the formation of a complex between the desired substance and the functional monomer (standard), having in this process the polymerization by means of a radical agent, which it will propagate and form the complexes that will be fixed through cross-linking reactions of the polymers, in this way, the molded molecules are extracted from the polymer matrix, resulting in a highly selective and specific polymer with the mold formed (ALVES et al, 2015;SARAFRAZ-YAZDI and RAZAVI, 2015;MADIKIZELA et al, 2018). MOHAJERI et al, 2010;YANG et al, 2014;SARAFRAZ-YAZDI and RAZAVI, 2015;NCUBE et al, al., 2019).…”
Brazil has a vast biodiversity of food matrices, sources that can be used for the extraction of various biomolecules that can help supplement products, act as food coloring, or even assist in industrial processes. Thus, the present study focuses on approaching traditional and emerging ways for extracting compounds, as well as deepening the foundations of the various techniques already used by the scientific literature for purification of the obtained extracts.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.