Simultaneously achieved high energy-storage and superior charge–discharge performance in K0.5Bi0.5TiO3-based lead-free ceramics by A-site defect engineering
“…(m) ε r of BKTBFO- x NSN ceramics as a function of temperature at 10 kHz. (n) Comparison of Δε/ε150 °C for different materials. ,,− …”
Section: Resultsmentioning
confidence: 99%
“…For example, Chen et al prepared pure BKT ceramic and obtained a P max of only 41 μC/cm 2 at the highest electric field. 17 Li et al successfully synthesized Ba(Mg 1/3 Nb 2/3 )O 3 modified BKT ceramic with a low P max of 28 μC/cm 2 . 18 Based on this, the recently investigated BKTbased ceramics exhibit poor energy storage properties (P max < 40 μC/cm 2 , W rec < 3 J/cm 3 , η < 70% and BDS <300 kV/ cm).…”
Section: Introductionmentioning
confidence: 99%
“…Unfortunately, due to the volatilization of Bi and K, it is difficult to prepare BKT-based ceramics with high P max . For example, Chen et al prepared pure BKT ceramic and obtained a P max of only 41 μC/cm 2 at the highest electric field . Li et al successfully synthesized Ba(Mg 1/3 Nb 2/3 )O 3 modified BKT ceramic with a low P max of 28 μC/cm 2 .…”
Hybrid electric cars and pulsed power technologies have increased the demand for capacitors with high energy density, wide temperature stability, high operating voltage, and good mechanical qualities. In this work, (1 − x) (0.6Bi 0.5 K 0.5 TiO 3 -0.4BiFeO 3 )-x(Na 0.4 Sm 0.2 NbO 3 ) ((1 − x) (BKTBF)-xNSN) relaxor ceramics were prepared by constructing morphotropic phase boundary (MPB) combined with oxygen vacancy defect engineering. It is worth noting that the 0.6BKT-0.4BFO ceramics at MPB have a high P max ∼ 60 μC/cm 2 . The ultra-hard (H V = 10.7 GPa) BKTBFO-0.16NSN relaxor ferroelectric ceramic achieves a high W rec of 6.52 J/cm 3 , a working temperature of 20−120 °C, and a working frequency of 1−1000 Hz. Additionally, the BKTBFO-0.16NSN ceramic demonstrates comprehensive pulse charge−discharge performance (I max = 17.2 A, C D = 546.7 A/cm 2 , P D = 54.7 MW/cm 3 , and t 0.9 = 59 ns) and excellent stability (25−125 °C and 10 4 charge−discharge cycles). This study offers a novel approach for the practical implementation of high-performance pulse capacitors, which will undoubtedly stimulate further research and development of high-P max energy storage dielectrics (such as BNT, BKT, and BFO).
“…(m) ε r of BKTBFO- x NSN ceramics as a function of temperature at 10 kHz. (n) Comparison of Δε/ε150 °C for different materials. ,,− …”
Section: Resultsmentioning
confidence: 99%
“…For example, Chen et al prepared pure BKT ceramic and obtained a P max of only 41 μC/cm 2 at the highest electric field. 17 Li et al successfully synthesized Ba(Mg 1/3 Nb 2/3 )O 3 modified BKT ceramic with a low P max of 28 μC/cm 2 . 18 Based on this, the recently investigated BKTbased ceramics exhibit poor energy storage properties (P max < 40 μC/cm 2 , W rec < 3 J/cm 3 , η < 70% and BDS <300 kV/ cm).…”
Section: Introductionmentioning
confidence: 99%
“…Unfortunately, due to the volatilization of Bi and K, it is difficult to prepare BKT-based ceramics with high P max . For example, Chen et al prepared pure BKT ceramic and obtained a P max of only 41 μC/cm 2 at the highest electric field . Li et al successfully synthesized Ba(Mg 1/3 Nb 2/3 )O 3 modified BKT ceramic with a low P max of 28 μC/cm 2 .…”
Hybrid electric cars and pulsed power technologies have increased the demand for capacitors with high energy density, wide temperature stability, high operating voltage, and good mechanical qualities. In this work, (1 − x) (0.6Bi 0.5 K 0.5 TiO 3 -0.4BiFeO 3 )-x(Na 0.4 Sm 0.2 NbO 3 ) ((1 − x) (BKTBF)-xNSN) relaxor ceramics were prepared by constructing morphotropic phase boundary (MPB) combined with oxygen vacancy defect engineering. It is worth noting that the 0.6BKT-0.4BFO ceramics at MPB have a high P max ∼ 60 μC/cm 2 . The ultra-hard (H V = 10.7 GPa) BKTBFO-0.16NSN relaxor ferroelectric ceramic achieves a high W rec of 6.52 J/cm 3 , a working temperature of 20−120 °C, and a working frequency of 1−1000 Hz. Additionally, the BKTBFO-0.16NSN ceramic demonstrates comprehensive pulse charge−discharge performance (I max = 17.2 A, C D = 546.7 A/cm 2 , P D = 54.7 MW/cm 3 , and t 0.9 = 59 ns) and excellent stability (25−125 °C and 10 4 charge−discharge cycles). This study offers a novel approach for the practical implementation of high-performance pulse capacitors, which will undoubtedly stimulate further research and development of high-P max energy storage dielectrics (such as BNT, BKT, and BFO).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.