Silver Migration in Electrical Insulation

Abstract

Silver migration may be defined as a process by which silver, when in contact with insulating materials under electrical potential, is removed ionically from its initial location, and is redeposited as metal at some other location. This process requires adsorption of water on the insulation surface. Silver is unique in this respect in that it is easily oxidized and reduced and does not passivate. Other metals do not present a practical migration hazard. Presented herein are examples of actual experience wherein silver migration caused trouble, and an explanation of this phenomenon based upon chemical and physical considerations and related laboratory evidence. It is concluded that silver should be used with great caution under the conditions noted.

Nanoscale memristive radiofrequency switches

“…Under otherwise identical conditions, a higher current led to a filament with larger diameter and hence lower resistance; however, this may also increase the energy required for programming. The filament formation initiates from the silver side, consistent with the electrochemical reaction mechanism [30][31][32] . However, previously reported devices with a similar structure but a larger gap size had considerably higher resistance because, rather than a continuous metal filament, isolated metal islands were formed between the electrodes 28,31 .…”

Enhanced fabrication of hybrid Cu-Cu₂O nanostructures on electrodes using electrochemical migration

“…In metals, ECM involves the movement and precipitation of metallic atoms of electrodes in contact with an insulating material, inside and at the surface of the insulating material (Kohman et al, 1955 andFujishiro et al, 2007). The existence of water between the electrodes is a key factor.…”

Power Modulation Investigation for High Temperature (175-200 degrees Celcius) Automotive Application

“…CFF is an electrochemical process that involves the transport (usually ionically) of a metal through or across a non-metallic medium under the influence of an applied electric field [69][70][71]. CFF is a potential reliability problem, in that it can cause current leakage, dielectric breakdown and electrical shorts between conductors.…”