Sequence effects on the life estimation of thin-walled welded tubular structures made of HSS + UHSS under bending

Abstract

Welded hollow sections are typical in different industries. A database of fatigue life data of welded hollow section joints covering sequence effects and the accuracy of the linear damage accumulation is presented. The effects of the shape of the applied load spectra, sequence effects of different amplitudes have been investigated using two high-strength steels. This document covers thin-walled tubes of 2-mm thickness made of low-carbon or mild steel 1.8849 (S460MH) and austenitic TWIP-steel 1.4678 + CP700 (X30MnCrN16-14). Constant amplitude and two-level load spectra are presented to check the linear damage accumulation. Using stress concentration factors from finite element analysis, typical FAT classes for the structural and the effective notch stress concepts are checked as well. Both structures show much higher strength compared IIW recommendations by structural stress approach and DVS 0905 by effective notch stress approach. Typical maximum linear damage sums taken from recommendations and codes of 0.2 or 0.5 are exceeded for all spectra investigated and in some of the cases even significantly above 1.0. Transferability of the recommendations to component type structures like those tubular joints made of high-strength steel needs revision to lift its lightweight potential but this will require additional data.