Sensitivity Enhanced Refractive Index Fiber Sensor Based on Long-Range Surface Plasmon Resonance in SiO2-Au-TiO2 Heterostructure

Abstract

Long-range surface plasmon resonance (LRSPR), generated from a coupled plasmon polariton in a thin metal slab sandwiched by two dielectrics, has attracted more and more attention due to its merits, such as longer propagation and deeper penetration than conventional single-interface surface plasmon resonance. Many useful applications related to light–medium interaction have been demonstrated based on the LRSPR effect, especially in the sensing area. Here, we propose and demonstrate an LRSPR-based refractive index sensor by using a SiO2-Au-TiO2 heterostructure, in which a D-shaped honeycomb-microstructure optical fiber (MOF) is designed as the silica substrate and then deposited with a gold film and thin-layer titanium dioxide (TiO2). By using the full-vector finite-element method (FEM), this heterostructure is numerically investigated and demonstrated to excite LRSPR without a buffer layer, which is usually necessary in previous LRSPR devices. Through comprehensive discussion about the influence of structural parameters on the resonant wavelength, the excitation of the LRSPR in the proposed heterostructure is revealed to be highly related to the effective refractive index of MOF’s fundamental core mode, which is mainly determined by the MOF’s pitch, the thicknesses of the silica web and the planar-layer silica. Moreover, the thin-layer TiO2 plays an important role in significantly enhancing the resonance and the sensitivity to analyte’s refractive index as well, when it is coated on the top of the Au film rather than between the metal and waveguide. Finally, the proposed LRSPR sensor based on SiO2-Au-TiO2 heterostructure shows an ultra-high wavelength sensitivity of 20,100 nm/RIU and the corresponding minimum resolution is as low as 4.98×10−7 RIU. Thus, the proposed LRSPR device offers considerable potential for sensing applications in biomedical and biochemical areas.

Human Teeth Disease Detection Using Refractive Index Based Surface Plasmon Resonance Biosensor

“…A gas sensor based on the ZnO-Bi 2 O 3 structure was introduced by Liu et al and may be used to identify diabetes early on [33]. Shangguan et al and Wu et al proposed RI-based absorption sensors and attained greater terahertz absorption rates [34,35]. MXene is a new emerging 2D material that has recently gained popularity among researchers due to its electrical properties, such as high conductivity, and optical properties such as the ability to easily access hydrophilic surfaces [36,37], greater spacing between interlayers, higher thermal stability, and surface area [38].…”

Silver-TiO2 coated D-shaped photonic crystal fiber based SPR sensor for ultrasensitive refractive index detection: design and FEM analysis

“…Materials like zinc oxide (ZnO), titanium dioxide (TiO 2 ), and aluminum oxide (Al 2 O 3 ) are frequently employed as sensing layers in these sensors. This choice is attributed to their elevated RI and remarkable responsiveness to alterations in the surrounding environment [24][25][26]. The presence of metal oxides at the metal-dielectric interface alters the SPR behavior by modifying the effective RI of the sensor, leading to changes in the resonance peak and sensitivity [27].…”

Black Phosphorous and Cytop Nanofilm‐Based Long‐Range SPR Sensor with Enhanced Quality Factor

“…Surface plasmon resonance (SPR) is the mainly focused principle for many sensing applications in the optical field [1]. The surface plasmons (SPs) are the cloud of electrons propagating along the metal surface as the incident wave (TM polarized) strikes the metal surface's free electrons [2,3]. So, the phenomenon of SPR generally occurs when the incident wave vector matches with the surface plasmon wave vector [4].…”