Abstract:Abstract:The importance of self-reinforced bioabsorbable polymers has been growing due to their use in orthopedic and dental implants. Bioabsorbable polymeric implants manufactured only by the processes of injection or extrusion without the post processing of self-reinforcing leave a great deal on presenting an appealing alternative in terms of the mechanical strength suitable for use in the fixation of bone fractures. One of the most promising ways to promote the increase of mechanical properties of bioresorb… Show more
“…Among bioresorbable polymers of interest is the copolymer poly (L,co-D,L-lactic acid; PLDLA) that is widely used in the proportion 70:30 because of its good mechanical properties and excellent biocompatibility. This polymer has been the subject of study of this research group and its synthesis is already consolidated so that the polymer has high molecular weight [7][8][9][10][11][12][13][14] . Though PLA is limited by its inherent brittleness, its properties can be significantly enhanced and broadened by modification via copolymerization, which provides a number of advantages because the architecture and composition of the biomaterials can be tailored to control and composition of the biomaterials can be tailored to control the material properties (by anionic or coordinated polymerization) 15 .…”
Terpolymers of L-lactide, D,L-lactide and trimethylene carbonate (TMC) were synthesized via the ring-opening polymerization reaction for cyclic monomers using stannous octoate as the initiator at a ratio of ~0.05 mol% (monomers/(SnOct) 2 ). Synthesis was done at 130 °C for 48 h. The inclusion of TMC, an aliphatic elastomeric polycarbonate, alongside polymer chain segments containing L-lactide and D,L-lactide, was expected to yield a material with improved properties such as increased elongation; this would overcome the limitation of copolymers consisting entirely of lactide and D,L-lactide. The terpolymer properties were assessed by Nuclear magnetic resonance spectroscopy 1 H and 13 C NMR, infrared spectroscopy, differential scanning calorimetry and thermogravimetry, with particular attention being given to the effect of TMC on the copolymer of L-lactide-co-D,L-lactide. The mixing of these polymers resulted in material with a high molar mass (10 5 g/mol). The mechanical properties of the terpolymer were assessed using pins of this material that were tested by mechanical flexion at three points. When compared with results for the copolymer PLDLA there was a decrease in Young's modulus for the TMC-containing terpolymer.
“…Among bioresorbable polymers of interest is the copolymer poly (L,co-D,L-lactic acid; PLDLA) that is widely used in the proportion 70:30 because of its good mechanical properties and excellent biocompatibility. This polymer has been the subject of study of this research group and its synthesis is already consolidated so that the polymer has high molecular weight [7][8][9][10][11][12][13][14] . Though PLA is limited by its inherent brittleness, its properties can be significantly enhanced and broadened by modification via copolymerization, which provides a number of advantages because the architecture and composition of the biomaterials can be tailored to control and composition of the biomaterials can be tailored to control the material properties (by anionic or coordinated polymerization) 15 .…”
Terpolymers of L-lactide, D,L-lactide and trimethylene carbonate (TMC) were synthesized via the ring-opening polymerization reaction for cyclic monomers using stannous octoate as the initiator at a ratio of ~0.05 mol% (monomers/(SnOct) 2 ). Synthesis was done at 130 °C for 48 h. The inclusion of TMC, an aliphatic elastomeric polycarbonate, alongside polymer chain segments containing L-lactide and D,L-lactide, was expected to yield a material with improved properties such as increased elongation; this would overcome the limitation of copolymers consisting entirely of lactide and D,L-lactide. The terpolymer properties were assessed by Nuclear magnetic resonance spectroscopy 1 H and 13 C NMR, infrared spectroscopy, differential scanning calorimetry and thermogravimetry, with particular attention being given to the effect of TMC on the copolymer of L-lactide-co-D,L-lactide. The mixing of these polymers resulted in material with a high molar mass (10 5 g/mol). The mechanical properties of the terpolymer were assessed using pins of this material that were tested by mechanical flexion at three points. When compared with results for the copolymer PLDLA there was a decrease in Young's modulus for the TMC-containing terpolymer.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.