Rigidity, creep and dynamic strength of plastics for three-dimensional printing of machine parts

Abstract

Increasingly, parts of complex shapes are made using three-dimensional printing. This technique is also used in the design of equipment at the stage of physical modeling of their structures to determine certain properties of the product as a whole and its individual parts (details) on the corresponding models. The necessary conditions for physical modeling are the geometric and physical similarity of the model and kind. The presence of such proportionality makes it possible to recalculate the experimental results obtained for the model in kind by multiplying each of the determined values by a constant multiplier for all values of this dimension – the similarity coefficient. However, to study the physical characteristics of a product, it is necessary to take into account the mechanical properties of the material of its model. From various sources, you can find the main mechanical characteristics of plastic threads or samples made on a 3-D printer. Their values vary greatly depending on the manufacturing technology of models and are determined under conditions of static loading only, which is not enough to study the stress-strain state of parts that are affected by suddenly applied, long-term and dynamic loads during machine operation. This paper presents the results of a study of the physical and mechanical properties of polylactide (PLA) and polyethylene tereflatate (PET-G), which are used in the manufacture of parts by three-dimensional printing. The specific stiffness of polymers was for PLA 1.61…2.18 MPa·m3/kg, for PET-G – 1.15…1.41 MPa·m3/kg. The specific impact strength for PLA is 751.6…774.2 J·m/kg, for PET-G – 571.6…583.0 J·m/kg. The specific endurance for PLA was 1.75…2.76 kPa·m3/kg, for PET-G – 3.0…3.10 kPa·m3/kg.

Universal eco-friendly biodegradable packaging for storage and transportation of food and industrial goods based on shives of bast plants

“…A number of indicators are known, using which it is possible to give an objective assessment of the quality of samples of lumpy packaging for transportation and storage of eggs [13].…”

Improving the reliability of the hammer grain crusher by optimal design of the paddle wheel

“…In addition, the movement of the material along the x axis will be neglected by u ≈ 0. With regard to the problem under study on a symmetric integration interval, in the case of a limited solution at both ends of the segment [-t, +t], we have [4][5][6][7][8][9][10][11][12][13][14][15]:…”

Simulation of the stress state during blade wear and optimal design of the grain crusher wheel

“…New modeling technologies are an innovative approach to the "life" cycle of design-productionoperation of a technical system. The development of an adequate mathematical and physical model of the working process of the machine makes it possible to increase speed, economic efficiency, reliability in the design of components and mechanisms, as well as optimize the design of new or upgraded equipment [1][2][3][4][5][6][7][8]. Currently, hammer-type grain crushers are widely used in the production of feed.…”