Rheological Characterization of Non-Newtonian Mixtures by Pressure Pipe Tests

Abstract

The rheological behavior of non-Newtonian fluids in turbulent conditions is an important topic in several fields of engineering. Nevertheless, this topic was not deeply investigated in the past due to the complexity of the experimental tests for the assessment of the constitutive parameters. Pressure pipe tests on Herschel-Bulkley mixtures were proven to be suitable for exploring turbulent conditions, but discrepancies with the results of tests performed in laminar flow were detected. These contradictions could be attributed to the inconsistencies of the Herschel-Bulkley model (HB) for high shear rate flows, proven by Hallbom and Klein, who suggested a more general “yield plastic” model (HK). Hence, in this study, a procedure for the estimation of the rheological parameters of both HB and HK models in pressure pipe tests is defined and rated on a complete set of experiments. The HK model performed much better than HB model in the turbulent range and slightly better than the HB model in the laminar range, confirming the consistency of the “yield plastic” model. The rheological parameters obtained by the proposed procedure were used to numerically model a dam-break propagation of a non-Newtonian fluid, showing significant differences in terms of process evolution depending on the constitutive model.

Aqueous drilling fluids systems incorporated with green nanoparticles and industrial spent caustic: Optimum rheology and filtration loss properties

“…All the formulated fluids exhibit Non-Newtonian flow behavior. The fluids viscosity changes with shear rate [23]. As shear rate increases viscosity decreases for these fluids.…”

Rheology of a Viscous-Plastic Liquid in a Porous Medium

“…The works [8] [9] [10] [11] present filtration in an isotropic porous medium, described by the Navier-Stokes-Brickman equation, which combines the hydrodynamic equation with the filtration equation…”