2016
DOI: 10.1109/ted.2016.2606701
|View full text |Cite
|
Sign up to set email alerts
|

RF Performance of Trigate GaN HEMTs

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
1
1
1

Citation Types

1
11
0

Year Published

2017
2017
2023
2023

Publication Types

Select...
6
1

Relationship

0
7

Authors

Journals

citations
Cited by 18 publications
(12 citation statements)
references
References 28 publications
1
11
0
Order By: Relevance
“…While devices with wider tri-gates did exhibit flatter g m peaks than in planar devices, the full-width at half-maximum (FWHM) of the g m was only about 2.9 V at w fin = 123 nm, which was much smaller than that of the planar device (5.5 V). A similar phenomenon has also been observed in [3], [4], and [14]. While the underlying mechanism for this observation is not yet fully clear, it is likely due to the significant increase in capacitance per fin area (C fin ) with narrowing fins (which will be discussed later).…”
supporting
confidence: 81%
“…While devices with wider tri-gates did exhibit flatter g m peaks than in planar devices, the full-width at half-maximum (FWHM) of the g m was only about 2.9 V at w fin = 123 nm, which was much smaller than that of the planar device (5.5 V). A similar phenomenon has also been observed in [3], [4], and [14]. While the underlying mechanism for this observation is not yet fully clear, it is likely due to the significant increase in capacitance per fin area (C fin ) with narrowing fins (which will be discussed later).…”
supporting
confidence: 81%
“…Accordingly, the device dimensions, based on high PFoM and optimized values of f T and f MAX , for AlN/ β ‐Ga 2 O 3 HEMT corresponding to case 1 ( L GD = 1.2 μm, L GS = 0.32 μm, L HL = 0.18 μm, L FL = 0.12 μm, and t buffer = 0.47 μm) are selected for detailed dc and RF analysis. It is worth to mention that, corresponding to case 1, L GD = 1.2 μm is preferred over L GD = 1.0 μm to have lower value of the output conductance ( g ds ) 32 . Doping concentrations and ohmic contact resistance are kept same as given for delta‐doped β ‐Ga 2 O 3 MESFET 14 …”
Section: Resultsmentioning
confidence: 99%
“…It is worth to mention that, corresponding to case 1, L GD = 1.2 μm is preferred over L GD = 1.0 μm to have lower value of the output conductance (g ds ). 32 Doping concentrations and ohmic contact resistance are kept same as given for deltadoped β-Ga 2 O 3 MESFET.…”
Section: Scaling Of L Gd and T-gate Dimensionsmentioning
confidence: 99%
“…[ 18 ] As the size of the device decreases, the short‐channel effect also occurs, which affects the performance of the device. [ 19 ] Neha [ 20 ] adopted the method of increasing the gate field plate and source field plate, reduced the gate length to 0.25 μm, and obtained the maximum cut‐off frequency of the device is 38 GHz, and the breakdown voltage is 127 V. ASA. Fletcher [ 21 ] increased the device's breakdown voltage by using a double‐layer T‐type gate, the breakdown voltage reached 136 V, and the cut‐off frequency was 60 GHz.…”
Section: Introductionmentioning
confidence: 99%