Review of Refractive Index-Matching Techniques of Polymethyl Methacrylate in Flow Field Visualization Experiments

Abstract

The development of modern computational fluid dynamics (CFD) technology provides many preliminary references for experimental design. In addition, the CFD calculation results verified by experiments can display enormous microdata in areas that are difficult to measure through experiments, as an extension. This can make measurements more reasonable and effective, shorten measurement times, and save manpower and capital significantly. Therefore, it is vital to verify the accuracy of CFD calculation results, especially in cases of complex structures and multiphase flows. The results of model tests can be utilized in a prototype experiment by properly designing a test section and selecting a working fluid if the Reynolds similarity criterion is met. Optical measurement technology is a noninvasive measurement method, and the impact on the flow field can be almost negligible. It is advised to use transparent materials and prepare a refractive index-matching (RIM) fluid to obtain a good optical path. Polymethyl methacrylate (PMMA) is widely used in flow field visualization experiments because of its good light transmission and mechanical strength. This review is aimed at introducing the current status of different flow field measurement techniques; moreover, it is intended to help the readers to become more familiar with the principles of RIM, the characteristics, applications, and usage suggestions of various RIM fluid schemes of PMMA, providing references for researchers in the design, preparation, and conducting stages of flow field visualization measurement experiments. This review is divided into five sections. In the introduction section, Chapter 1, relevant research developments and related results of flow field measurements are presented, followed by the innovations and benefits of this paper. In Chapter 2, the flow field visualization measurements are presented and a derivation is shown. In Chapter 3, some RIM fluid schemes of PMMA and their applications are given, which are very valuable for peers. In Chapter 4, the measurement and analysis of some physical properties are described. In the RIM process, it is necessary to focus on the RI, density, dynamic viscosity, compatibility, stability, safety, and cost of RIM fluids. These factors greatly impact the accuracy of experimental results, experimental progress, and safety of the experimenters. Based on the analysis and our practical experience, some suggestions are given for preparing and using RIM fluids. In the conclusion section, Chapter 5, the results and practical implications of this paper are summarized.

Applicability of RANS models and pressure drop in edge subchannels for 19-pin wire-wrapped fuel bundle channel in CiADS

“…However, if the Reynolds similarity criterion is met, it is possible to analyze the flow characteristics of LBE through tests with alternative working fluids. This can be achieved by designing an appropriate test section and selecting an alternative working fluid [ [6] , [7] , [8] , [9] ]. In previous decades, researchers have experimentally and numerically investigated the hydraulic characteristics in a wire-wrapped fuel bundle channel on the basis of dimensional analysis and similarity theory.…”